3D MODEL DESCRIPTION Hope you like this Hylian Shield I made from Twilight Princess!
My goal with this print was to make something that could be held and hung on the wall easily.
The files include the whole main part of the shield as well as the main part of the shield split into 4 pieces for easier printing.
I made the handle removable and held with 18 mm x 5 mm magnets in order to be able to hang the shield for display easier! Or you can glue it in to make it permanent. The shield can be mirrored in the slicer to be left handed or right handed.
The top part that holds the strap also has a hole to loop a rope or wire through to hang the shield from.
Mine is scaled to 24 inches but you can scale it to whatever size fits your needs.
Thank you!
3D PRINTING SETTINGS 15% Infill Tree supports Brim