Official collection of Starblocks brand interlocking construction bricks.

Starblocks Construction Bricks Set No. 001 - “Be Mine / Print Me” Valentine's day set inspired by candy hearts.   10pcs, assembly instructions included.  Each set is ~20g filament.  

PDF Assembly Guide:  http://ted.ws/star-set-1-pdf/

Messages Available (in one or two colors):
- Be Mine
- Print Me
- Love You
- Miss You
- Kiss Me
- Want another?  Request it here http://ted.ws/sb-lexify/

This is a preview of the Starblocks Project - 3d Printable Interlocking Bricks that are compatible with major brands.    If you've been disappointed by the quality of 3d printed bricks before, please still give Starblocks a chance, I think you'll be pleasantly surprised.  I've been working on Starblocks for almost two years, there is a LOT more coming soon.

More Starblocks bricks available in this collection: https://thangs.com/designer/Starblocks3d/collection/Starblocks-134154

Get involved, stay informed:
- Join the mailing list: http://ted.ws/sb-mail/
- Join the subreddit: http://reddit.com/r/starblocks3d/
- Visit us at http://starblocks.com/ (coming soon)

Notes on printing Starblocks:
- Bed adhesion can be a challenge, even with enclosed printers.  Highly suggested to use a Supertack or  [Cryogrip](https://amzn.to/40OIfID) build sheet.
- If you don't have one of these sheets, try: [Glue / Magigoo](https://amzn.to/4awRyRH), mouse ear brims, a 10-20 layer skirt.  
- Drying the filament helps with both polish and mechanical function.  
- They print nicely in PLA and PETG, the finish is usually a bit nicer in PLA.   ASA requires scaling up, and glue and a full brim.

If you're going to slice them yourself:
- Blocks should be rotated 22.5% degrees before printing.  This puts the seam on the studs out of interface with both Starblocks and major brand injection molded bricks. 
- Starblocks are designed to be printed with ARACHNE / VARIABLE WIDTH WALL ENGINE, the mechanism degrades or fails entirely without it. 
- Starblocks are designed for 0.1mm or 0.2mm layer heights and 0.42mm layer lines.  
Suggested to keep outer-wall first for best finish.
- You can make them tighter/looser by using hole-compensation (0.025 increments from 0 to 0.150mm is a good place to start).  Be forewarned, due to quirks in the wall engine and number of lines, the results are often non-linear e.g. making the holes 0.025 smaller can create a much tighter mechanism than making the holes 0.050 smaller.   Be additionally warned, the range between “doesn't work, too loose” and “doesn't work, too tight” is less than half a millimeter.
- Your slicer may complain about unsupported overhangs, don't worry about that, it is wrong - all of the overhangs are either built at 45 degrees or bridge-able.  

Yes, these are compatible with major brands of injection molded interlocking brick toys (yes, I try to avoid saying the exact name of one of the brands - they have a history of being… overzealous).  

No, you don't need a high end printer to make them.   They print beautifully on the entire Bambu line, but the mechanism works even on my lowly Ender3 (reduce flow rate a bit, dry your filament, use arachne, mouse ear brims, and glue).

Multiple Elements of Starblocks are Patent Pending.   Starblocks are distributed by Fabric Animal Technologies LLC.  

Starblocks Set No 1 - Be Mine / Print Me

Starblocks Set No 1 - Be Mine 2025_0204 just bm one color ONLY.3mf

Starblocks Set No 1 - Be Mine 2025_0204 one color ONLY.3mf

Starblocks Set No 1 - Be Mine 2025_0204 two colors ONLY.3mf

Starblocks

Starblocks 001 - Be Mine - One Color .3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

Starblocks3d

Achievements

Seedling

Explorer

Starblocks

Starblocks Set No 1 - Be Mine / Print Me