ExoGuitar Foot and shoes for the following Guitar Part: https://amzn.to/3BmEVf5 

ExoGuitar - Bridge - Alnicov 6 Strings Saddle Headless

ExoGuitar - Bridge - Alnicov 6 Strings Saddle Headless.step

ExoGuitar - Bridge - Alnicov 6 Strings Saddle Headless.3mf

Cyber Butterfly Wings style for the ExoGuitar system. 

ExoGuitar - Cyber-Butterfly Wings

ExoGuitar - Butterfly Wing - Bottom Left.step

ExoGuitar - Style - Cyber Butterfly.3mf

This is the Free Core system of the Exo Guitar.  

It comes with the  "Training V" basic wings that are somewhere between a Travel/training guitar and a Flying V, and provide you with a chance to experience the ExoGuitar and how awesome it can be. 

ExoGuitar is a system that I've been working on for the last 6 months and I am excited to finally be releasing it out into the wild!  The plan is to put out the core framework for free and then have a membership for more advanced parts that build on top of the core package. 



---

**Suggested Print Settings:**
Note: .3mf files have been provided that contain optimal settings. 

**Any part that interfaces with the Strings or Neck:**
**Plastic:** ABS, ASA, PC, Nylon
- Infill: 55% Gyroid
- Walls: 8

**Plastic:** PLA, PET-G
- Infill: 99%
- Walls: 10

**All other parts: **
**Plastic:** Any
- Infill: 35%
- Walls: 6
---

**Bill of Materials:**
This is a suggested BOM for the Core exo guitar.  This is by no means the limit to what guitar parts you can use with this system.  Files with blank faces have been added so you can customize your faceplates as much as you want with whatever systems you want. 
Disclaimer: All links are affiliate links

6x M5x12 SHCS - https://amzn.to/492KY4J
24x M5x6 SHCS - https://amzn.to/3CN3PVy
24x M5 T-Nuts - https://amzn.to/3B0aY4b
4x M3 T-Nuts - https://amzn.to/3V9mCjU
4x M3x8 SHCS - https://amzn.to/3OZGUc9
16x M4x6 SHCS - https://amzn.to/3BJciIV
1x M3x30 SHCS - https://amzn.to/3Z7kBWQ
2x 250mm 2020 Aluminum Extrusion - https://amzn.to/4fLjwLw
26x 6x3 Magnets - https://amzn.to/497vUTt
1x M3 Heat Set Insert - https://amzn.to/3B5HcLe
6x M4 Heat Set Insert - https://amzn.to/4fGiSyR
2x M8 Heat Set Insert - https://amzn.to/499mxTq
1x 25 Fret Neck - https://amzn.to/4g3IllC
1x Neck Plate + Screws - https://amzn.to/3CClwqv
1x Tune-o-Matic Bridge - Lrg Metric - https://amzn.to/4eQ2hqS
1x Guitar Strings - https://amzn.to/3Z5oRpR
1x Wiring Harness - https://amzn.to/4g5FzvR
2x Pickups - https://amzn.to/3Zoe23e

---

**Assembly Instructions**
1. Print all files
2. Add the following heat inserts: 
  a. M3 to top of Neck Mount
  b. 2x M8 to front of Foot
  c. 6x M4 to rear of foot (Leave them sticking out just a bit for later)
3. Add the following Magnets:
  a. 8x 6x2 magnets to rear of face plate
  b. 8x 6x2 magnets to front of Compartment - Make sure that they pair with the face plate magnets
  c. 4x 6x2 magnets to rear of right wing
  d. 4x 6x2 magnets to right wing covers - Make sure they pair with the Right Wing magnets
4. Glue the Rails into the Compartment Cover.  
5. Attach the 2020 extrusions to the Neck Mount using the M3 T nuts and 4x M3x8 SCHS.  Make sure to tighten these screws well.  Locktite might not be a bad idea for these screws. 
6. Pop the compartment cover into the 2020 extrusions under the neck mount.  It should be touching the Neck Mount. 
7. Attach the Foot to the 2020 extrusions using the 6x M5x12 and 6x M5 T-Nuts.  The Shoes should go between the foot and the 2020 extrusions.  Make sure that there's approximately a 1mm gap between the foot and the Compartment Cover.  Tighten these screws well. Locktite might not be a bad idea for these screws. 
8. Remove the Compartment cover for now. 
9. Attach the Left Wing pieces to the 2020 Rail using the M5x6 screws and M5 T-Nuts.  I would recommend using CA glue between the wing pieces after you've gotten them on the rail so everything is lined up nicely. 
10. Glue the Right Wing Peg into the bottom of the right wing. 
11. Attach the Right Wing Pieces to the 2020 Rail using the M5x6 screws and M5 T-Nuts.  As you're sliding the pieces on, add CA glue to the peg hole in the top of the right wing.  
12. Optional: use black hot glue on the inside of the right wing to close any gaps left in the face of the guitar. 
13. Install the potentiometers, switch, and jack to the Right wing, and do your wiring.  For now, lookup a different walkthrough for how to wire a guitar.  I recommend adding some form of wire connector to any wires that will have to travel out of the wing compartment so the pieces remain modular.
14. Install the Pickups into the Compartment.  For most pickups, The screw should go through the rail, then through  a spring, and then thread into the pickup.   As above, I would recommend using wire connectors here so you can disconnect the compartment from the rest of the guitar. 
15. Pop the compartment into place and adjust the pickups until they are as high as they can go without raising the face plate 
16. Put the faceplate over the compartment to hide the pickups and the rails. 
17. Connect the Pickups to the Right Wing Wiring harness.  
18. Using a soldering iron and solder, connect the 6 m4 heat inserts on the bottom of the foot together so they can pass electrical signals.  Then solder a wire to one of them and run it to the back of the volume pot.  I recommend using a wire connector here so you can disconnect this if you want to take the guitar apart later. 
19. Put the Right Wing Covers in place. 
20. Install the neck.  First put the neck in place and get it in there snug.  Then using a 3mm drill bit carefully drill through the holes in the neck mount into the neck, being careful to not drill through the face of the neck.  A piece of masking tape on the drill bit can help with this. The screws should go through the neck plate, then through the neck mount, and into the neck.
21. Install the back plates with the M3x
21. Install the strings. 
22. Tune
23. Rock Out!

---

## Coming soon:
- Improved Assembly Instructions
- More Photos

The following items are on my roadmap for release in the near future and will be available as membership items or individually priced items. 

- ExoBass (This is already designed, just need to put together it's .3mf and BOM.)
- Offset Neck Mount (already designed)
- Butterfly Style Wings (already designed)
- Warlock Style Wings (already designed)
- BM Style wings (already Designed)
- Headless Bridge - Aka: "Bearing Bridge"
- Printable Neck
- Printable Neck - Metal Frets
- Printable Neck - Adjustable Nut
- Embedded Speaker / Amp
- Embedded Tuner
- Embedded Loop Pedal / Drum Machine
- Embedded Effects Pedals


Exo Guitar - Core (Training V)

ExoGuitar - Training V.3mf

Parts for the ExoGuitar Modular Guitar System

ExoGuitar

Is your Infinity Cube too Basic for you?  Does it keep breaking on you?  
Do you want one with more hardware?  That you can adjust to be perfect and lock it in with Loctite?  

Have you ever looked at your Infinity Cube and wished it had way more Heatset Inserts?

LOOK NO FURTHER!

The Over-Engineered Infinity Cube solves all of these problems and more!  Want one with screws?  This bad boy is FULL of screws!  Each joint can be individually loosened and tightened to suit the user's preferences.  

If you are like me and found the durability of the many Infinity Cube designs floating around to be lackluster, that most of the time the print would fail and the cube would fuze into a weird rectangle and never achieve it's goal of becoming a cube, then this model is for you!  It prints in 16 individual parts and then you get to install 32 pieces of hardware (16 M3x4x5 Heatset Inserts and 16 M3x16mm SCHS)!  If any part of this does happen to break, you can remove just that part and replace it, instead of having to throw the entire cube away. 

Because it is printed in many different parts, your ability to customize it's colors is beyond compare!  Make every cube a different color of the rainbow!  Create a pattern using the colors of the cubes, screws, heatset inserts, and hinges to suit your specific tastes!

**Bill of Materials**

- M3x16 SHCS | 16 | https://amzn.to/3wRwW7k 
- M3x4x5 Heat Set Inserts | 16 | https://amzn.to/4aFAXtr 
- 4oz 3/1 Dry Lube (optional) | 1 | https://amzn.to/3USO8Bo 
 

**Assembly**

Step 1: Heat Set Inserts
Install all 16 Heat Set Inserts using your Soldering Iron or Heat Set Insert Press.  There are 2 per cube. 

Step 2: Lay out cubes in correct Order
The following image contains the order and position required for proper assembly of the Infinity Cube.  Following this exactly will allow you to have the best looking & functional cube.  It is possible to assemble the cube in such a way that it does not fold correctly, and it is also possible to assemble it so the screws aren't symmetrical. .
 
Step 3: Insert Joints and Screws
Now that you have laid out all of your cubes, Begin joining them together using the M3x16 SHCS.  

Step 4: Tune
Now that you have assembled the cube it's time to tune!  Play with it and find the loose joints and tighten them up, and loosen the ones that are too tight!  Want it to be smoother?  Add some Dry Lube (https://amzn.to/3USO8Bo) to the joints.  

This model was created 100% from scratch and is not a remix of any of the other Infinity Cube models out there. 

Suggestion:  This is an AMAZING model to use for flushing your filament changes into, as the patterns look SUPER cool when playing with it!  Here's an example: 

Over-Engineered Infinity Cube

Super Tough Infinity Cube.3mf

Super Tough Infinity Cube - Fixed Bed.3mf

Super Tough Infinity Cube - Bedslinger.3mf

Super Tough Infinity Cube - Bedslinger - x6.3mf

Super Tough Infinity Cube - Mini - One Plate.3mf

Super Tough Infinity Cube - Anthem .3mf

Super Tough Infinity Cube - Fixed Bed - Candy Cane.3mf

Super Tough Infinity Cube - Fixed Bed - Single Solid Stripe.3mf

Uses Large Bolt 
Remix of Multiboard Angled Drill Holder by gray.tim1

Will post pictures after I'm able to print it. 

Multiboard Angled Drill Holder - Large Bolt

Multiboard Angled Drill Holder - Large Bolt.stl

Legs for your Gridfinity Bases.  Have screw holes on top and bottom so that Gridfinity Baseplates can be securely mounted to them. 

Bottom of legs fit into GridFinity Bases, so you can stack them.  Bottoms have screw holes too so you can securely attach them on both sides, which can allow you to trade the ability to move them easily for the ability to use less legs. 

The legs are hollow to cut down on material and also allow for cables to be run inside of them if you're feeling fancy.  

Sizes are the same as the Gridfinity Bins,  all Legs are 1x1 grid tiles, the number in the file name is the height of the tile in Gridfinity units.

Also included is a file for a Foot that can be used to cap off the Gridfinity Leg if you don't want to have it go into another Gridfinity Base.  I designed it to be TPU, but I haven't gotten around to printing one yet; if you have issues with it, please let me know!

This was created by heavily modifying the file found here: https://cad.onshape.com/documents/ec62516f416e296fb5d0368e/v/efa631e9aff5a2d28e5b555d/e/0604457b3b39d6ba92098846

My Modified OnShape File: https://cad.onshape.com/documents/31beb19461aa5944214225e7/v/f8f2ba1f786744c3b2975324/e/b19f687a42b7a09c04ba3def

More images coming soon, these things take a while to print. 

Gridfinity - Legs

Gridfinity - Leg - 20.stl

Gridfinity - Leg - Foot (TPU).stl

Gridfinity - Leg - 20 - 4.3mf

Gridfinity - Leg - 2x4.3mf

Gridfinity - Foot (TPU) x4.3mf

Gridfinity - Leg - 4x4.3mf

Gridfinity - Leg - 20x4.3mf

Gridfinity - Leg - 6x4.3mf

Gridfinity - Leg - 8x4.3mf

Gridfinity - Leg - 10x4.3mf

Gridfinity - Leg - 12x4.3mf

Gridfinity - Leg - 14x4.3mf

Gridfinity - Leg - 16x4.3mf

Gridfinity - Leg - 18x4.3mf

A simple clip with a M3 sized hole to allow for accessories to be mounted to the top of the Meta Quest 3. 

Potential Applications: 
- Horns 
- Fan Mount
- Whatever else you want

For more secure fastening, there is room to put two of these clips in so you can have two screws to secure whatever you want to secure. 

Horns not included. 

Important Note: This attaches to the headset in the same place the forehead strap connects, and is not compatible with any straps that use this connection; so this is only compatible with headsets that have an after-market head strap that doesn't use that connection; like the Bobo VR.  I may try to design one that can work with the strap in place in the future but no promises; I'm fairly new to making 3D models. 

Spikeon Studio

Achievements

Seedling

Novice Maker

Voyager

Debutant

Pinned models

Gridfinity - Legs

Over-Engineered Infinity Cube

Exo Guitar - Core (Training V)

ExoGuitar - Bridge - Alnicov 6 Strings Saddle Headless

ExoGuitar - Cyber-Butterfly Wings

Exo Guitar - Core (Training V)

ExoGuitar

Over-Engineered Infinity Cube

Multiboard Angled Drill Holder - Large Bolt

Gridfinity - Legs

Meta Quest 3 - Accessory Platform