Cat door parts that need to be screwed together with 3mm x 10 mm screws and nuts.

Cat Door

Cat Door Hinge Pin.stl

Side mount to door using double sided alien tape.

Cat Door Frame Mount.stl

Inside door frame. You will need to cut out a square corner of the screen door the same size as the inner edge of the frame.

Cat Door Inside Frame.stl

Cat Door Outside Frame.stl

Hard door flap. My cat didn't like pushung this door, so I designed a soft door.

Cat Door Flap.stl

I designed and printed 2 types of doors. A solid one and a soft door that uses tulle fabric to hold slats. 
To print the soft door, pause the print after 2-4 layers (at .2mm). Tape down the edges of the fabric to have a smooth surface, then resume printing.


Floppy Door Flap.stl

Round Tuit Coaster v3.stl

Round TuiT Coaster v4.stl

Gauge to determine IPD (inter-pupillary) setting for Quest 2

Printing:
Use .2mm layer height, no supports, no brim. The print will come out 90mm x 20mm x 3mm. It uses the IPD distances of (1) 58mm, (2) 63mm and (3) 68mm as per Quest 2 headset settings.

 
To use the gauge, look in a mirror with the gauge positioned so that the right pupil is seen through the "R" notch, then seeing which notch the left pupil looks through.


Quest IPD Gauge.stl

Gauge to determine IPD (inter-pupillary) setting for Quest 2

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Spideyguy

Achievements

Voyager

Seedling

Cat Door

Cat Door Hinge Pin.stl

Cat Door Frame Mount.stl

Cat Door Inside Frame.stl

Cat Door Outside Frame.stl

Cat Door Flap.stl

Cat Door

Round Tuit Coaster v3.stl

Round TuiT Coaster v4.stl

Quest IPD Gauge.stl