Game board/trays to use for starwars rivals, keeps the game area nice and tidy.

I used the pause print feature of my slicer to change colors on the center tray to highlight the numbers better.

player_tray.stl for players cards and models, you will need to print 2 of these.
rivals_tray.stl for location cards, you will only need 1 of these.

StarWars Rivals - Game Board

Player_Tray.stl

My version of dogg the board game. The game board can be setup in either the 4 or 6 player configuration. 

Colored rings can be printed and slotted into the board (make note of the rounded edge of the ring that is the bottom)

I like to print face down to get the texture of the base plate onto the game board top, supports not required depending on the printer. You can print any way you like.


Dogg - The board game. 

Dogg_CNR.stl

Display your favorite cards in a modular wall mount, Easy to print, easy to assemble and expandable for adding more cards down the track. Cards are required to be in a top loader sleeve. 
Screw-less using 3M Command hooks (Decorating Hooks - Part number 17026CLR) to hold the mount to the wall, you can keep adding them as your frame size grows.

Toploader_Display.stl is the main part of the frame and you need to print enough to have a top and bottom separated by display_poles.stl and/or display_joins.stl. Note that the top front of the toploader_display has the rounded edge. 

Display_pole.stl is used to join the main display.stl from the top and bottom.

Display.join.stl is used to join the main display.stl from the sides.

Recommend using a type of superglue to attach the poles and joiners before sliding the toploaders in.

Toploader Display Frame - Modular

Toploader_Display.stl

Showcase your 6" action figure collection. Each hexagonal shelf is designed to display your figures, while also being modular to allow for easy expansion as your collection grows.
This shelf can be mounted using 3M Command hooks (Decorating Hooks - Part number 17026CLR), these hooks fit perfectly into the cutout to be hidden behind the shelf.

The joiner.stl is used to make sure the shelves line up perfectly when adding extra shelves.

The peg.stl can be used to help the figure balance and sit more securely on the shelf. The hole in the bottom of the figures foot can vary in size. I use a small set of clippers, nail clippers or a file to trim down the peg to fit the figures foot.

Note: The Length and Width of this model is 215mm.

Licenced under CC BY-NC
https://creativecommons.org/licenses/by-nc/4.0/
   

Hexagonal 6" action figure display shelf

Hexagon_Figure_Mount.stl

Default

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Spankelicious

Select a membership plan

Spankelicious

Achievements

Seedling

StarWars Rivals - Game Board

Dogg - The board game.

Toploader Display Frame - Modular

Hexagonal 6" action figure display shelf