This effect tile is designed to test your luck - based on pure randomness, you will get either 2 balls or nothing at all. In any case, your ball will fall under the board, so you may get an advantage recovering it with, for example, a [Respawn Tile](https://thangs.com/designer/lucas.kristandt/3d-model/Hextraction%20Respawn%20Tile-874859)!

The rules for this tile are simple - if two balls came out of the tile, put two more through the hole in the cap right away.

ASSEMBLY:
Make sure that the flipper can return to approximately a "horizontal" position reliably, then secure the pin (compatible with [Flip-Flop](https://thangs.com/designer/ZackFreedman/3d-model/Hextraction%20Flip-Flop%20Tile-856502) and [Railroad Switch](https://thangs.com/designer/SpaceKotik/3d-model/Hextraction%20Railroad%20Switch%20Tile-872390?manualModelView=true&userName=model&modelIdentifier=872390) Tiles) with a drop of glue from the bottom and glue the cap. Also you can use a M3x8 or M3x10 screw instead of the pin.
And most importantly - your board must be properly leveled!

P.S: This is not a final version. The model has some minor issues - it may dispense balls on its own in case of strong vibrations and the flipper should reset its position more reliably. Also a rules card will be added. 

If you have any issues or suggestions, surely leave a comment!

Hextraction Dispenser Tile

Dispenser Tile.stl

This tile is similar to [Flip-Flop Tile](https://thangs.com/designer/ZackFreedman/3d-model/Hextraction%20Flip-Flop%20Tile-856502), but instead of redirecting balls it blocks one of the paths. It may provide interesting strategic moves - one ball can open the path for previously blocked balls.
You may use a M3x8 or M3x10 screw just like with Flip-Flop tile, but 3D printable pin (also compatible with [Flip-Flop](https://thangs.com/designer/ZackFreedman/3d-model/Hextraction%20Flip-Flop%20Tile-856502?part=07932a58-c3a6-46b3-b793-1657e10feb07) and [Dispenser](https://thangs.com/designer/SpaceKotik/3d-model/Hextraction%20Dispenser%20Tile-875412?manualModelView=true&source=All+Files) Tiles) works well too and is more aesthetic, in my opinion - just make sure the flipper moves freely and secure the pin with a drop of glue from the bottom.

Hextraction Railroad Switch Tile

Railroad Switch Tile Assembly(Don't print).stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

SpaceKotik

Achievements

Seedling

Voyager

Up and Coming

Hextraction Dispenser Tile

Hextraction Railroad Switch Tile