Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6030734.

Alright, to currently finish off the MegaMan3 series I have designed Gemini Man! 

Gemini man is afraid of snakes and I always wind up burning an E-canister to survive. Gemini Man also makes a copy of themselves in an attempt to best Megaman.  

This Model/Figurine, Is actually broken up into 3 parts and it allows for customization. Right now it's a cube, designed based on a stage element, I also have GeminiMan in an action pose and another where he is leaning against something. 

If I decide to generate more poses for Gemini Man then I will add them to this file set.

Again, like the rest of these Megaman files. I am in no way associated with the IPs involved with Megaman or any related content. I just model them.

Update: 6/1/23:
I just added 2 more poses to the collection, I have not printed these, they do have slight issues at the shoulders but at the moment I don't feel like reengineering the third figure...

GeminiMan From MegaMan3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6018274.

PickelMan Dozer (could be wrong about the last part of the name there).
PickelMan Dozer is a construction Robot. It can be seen in Hard Man and Top Man's levels, all it does is push, push push push. The only weak spot is the operator! It usually takes about 3 hits to take it out. but this is a great-looking figurine. (the wife tells me to get the pusher to move, but it's stationary in the game).

Anyways, Just like all the MegaMan3 models, I do not aspire to make money off of them. I cannot say the same for future models, If I do seek money its only for time spent modeling and materials front test prints. I am not associated with the IPs involved at all, I just love to model the subjects is all. 

PickelMan Dozer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5967837.

MagnetMan. This is the pose that CAPCOM programmed when the stage is selected and when the Robot master announces themself before getting decimated by MegaMan.

Magnet man does a few things. one is that He jumps to the top of the stage and shoots magnets which home in on Megaman, also they do this squatting magnet draw thing, and well, hitboxes collide and do damage to Megaman. run or slide away your prerogative. Spark Shot is supposed to be his weakness, but since MagnetMan is always my first to fight, eh? Just shoot him while he's jumping around. 

MagnetMan is owned by Capcom, the IP is owned by that company. All I did was interpret the design and made a fun little figurine with it! If I get told to stop, I will....probably... eventually.

Maget Man from MegaMan 3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5955146.

My Second Robot Master! HardMan! I'm not sure what I can say about HardMan. His stage can be nerfed at the beginning. Due to the system resources of the NES which also translated to all of the other legacy games that followed, if you let the flying bees next begin to drop their payload, if you pull back a bit, you can reduce the number of bees that chase You. Defeating HardMan gives you the Hard Knuckle which is the bane of TopMan. In the game, HardMan does jump and try to slam on top of you and kind of collapses on themself...This figurine doesn't do that.

I guess if you punch a top it actually does stop...

Hey, so, just like the rest of these other figurines. I don't own or have any connection to the IPs that Capcom legally owns. I don't seek a dollar from these. I'm just 3d modeling video game characters, building my proficiency. I don't seek to harm, I'm just doing this for fun. if someone tells me to stop, I will.

HardMan from MegaMan3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5779704.

MegaMan 3 for the NES is a favorite of mine. It got played over and over again. I decided to 3d model this baddie, the New Shotman. ( never knew that's what its name was but so it is.)

I modeled it from scratch and not looking at reference materials. Which is why it is not game accurate. I was winging it, didn't care it looked good. So, there's the original file without the eyes, and one with, and then I separated the top arcing launcher from the body so that when I printed and glued it together it looked as good as it could. 


Hey, so I have covid and got bored, thought I'd model this up. I don't own or have any association with the NES, Nintendo, Megaman, Neo Shotman, or any other entity associated with where the idea for this model came from.

New Shotman

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5837252.

It's a cute turtle, It's a sleepy turtle.

a co-worker of mine wanted me to 3d model a sleepy turtle something similar to a picture she showed me. after 4 days-ish and like 15 model revisions I have created this sleepy turtle.

She very much gushed over it. The turtle had a bit of a difficult time when I printed it, there wasn't much contact with the printer bed, and it's mostly spheres swashed and squished so it was tough for my FDM printer to print without the platform. at some point, I might revise the platform to look something a bit more interesting. Possibly a book of some kind, I already have ideas. 

Sleepy Turtle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5941170.

Want to fly on a dog?

Rush, MegaMan's robotic dog companion debuted in the third MegaMan/RockMan game for The Nintendo Entertainment System. Rush had three forms, a springboard, a flying rocket, and an underwater vehicle. This figurine is the second, The Rush Jet. In the first game, the Rush Jet had free movement but jumping caused the timer to stop. This was phased out in subsequent games where the energy drain was constant, and even moved forward on its own, whether or not MegaMan was even on it. 

Just like the other models on my profile, I do not own or am associated legally with the IPs involved, they are owned by Capcom exclusively. I do not and never will expect money for these models.  If I were, I'd only be expecting compensation for my time and effort to design these figurines. Also, if they say stop, I will.

Rush Jet

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5785548.

This is another baddie from MegaMan3. Its Peterchy! A scouting robot. All it does is move around and look at stuff! 

The feet cups got a little weird when printing but it did not diminish the overall print. I was concerned about having a floating ball when the piece was printing but it came out quite fine. 
The tubes were the most challenging part to figure out, but it came out brilliantly!

So that everyone is clear, I do not how or am associated with any possession of the IPs that this figure is involved with. MegaMan, the NES, Peterchy, and any other conceivable IPs in relation are owned by their respective entities. All I did was model and 3d print this thing. 

Peterchy

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5900475.

So, This is the Bikky. Hailing from Megaman/Rockman 3. This guy Jumps! And it's huge and you can only hurt it when its eyes are exposed. The documentation says hard knuckle is its weakness. I just slide under it and go along my way. This is my first and probably only print ( at this point) where movement is a feature. I tried, and with my FDM printer, it's a bit problematic. A SLA printer would probably make a more fully functional print.

The Bikky, and all related material/IP is owned by Capcom. I own nothing, I don't ask for money, I'm just doing this as a tribute to a fantastic franchise. 

Bikky

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5649963.

I have some wall space and thought it would be cool to display my  Ranger Keys on the wall, so I made a decent display device. The back of it is blank so you can superimpose the team symbol/Icon if you wish. To wall mount, a simple command strip can be used. 

JUST TO CLARIFY! I DO NOT in any way shape or form, own any rights to Power Rangers, Super Sentai, or any of the associated IP assets. AT ALL! These files herein are only a means to display a collection that I have had in a plastic bag for years! I am offering these blank key holders, if you choose to download them and pretty them up for your usage, I'm not going to stop you.

Blank Ranger Key Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5811817.

It's another baddie from the MegaMan3 game from capcom. This time it's the Electric Gabyoall, these little pests would prominently be featured in Spark Man's stages. Two of them would crawl along the floor and ceilings of the stages. You can't eliminate them, you would either have to time a jump or just take the hit, I always opt for the latter.

I make no claim that if you print two of these, they will generate an electric barrier. These are just models.

I also want to state this now, I don't own any rights to the source material that this model is based on. At this point, it's a means to develop my 3d modeling skills. I am in no way associated with Nintendo or Capcom, these aren't authorized models. I enjoy making these, and I want to see how many I wind up making. I am sharing these cause they are pretty freaking sweet.


Electric Gabyoall

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5837064.

Out of all the Boss Weapons from MegaMan3, The Magnet Missle is one of the most visualy interesting weapons in the entire game, I think.

I 3d modeled it as how I thought It would probably look if it was real. A magnet with Rockets stuck to it! The only thing to do to make it truly a magnet missile is to print it large enough that you can drill a hole into it and stick some magnets on it. But for now, you can enjoy 3d printing them and launching them at people. I can envision office warfare...

Megaman, RockMan, Nintendo, Capcom, or any IP related to the source material that inspired this model is owned by their respective entities. I'm just a Fanboy doing what any fanboy with a 3d printer would do, make stuff!

Magnet Missile

Jamacey climbs ladders, in an attempt to impede y our progression, some can even be seen running around the ground. 

This was designed for the verticle supports of an Ender 3 Pro and may not fit on other similar 3d printers without modifications.

I do not own or am associated with the IPs related to this character, capcom does. I just modeled it.

Jamacey

JamacyPrintFinal

Can't Stop this top. TopMan is one of the Robot Masters from Megaman3.

I don't own or am associated with any IP that this model was based on, Capcom does. Straight up, I just modeled it.

TopMan

It Jumps, It jumps at you. This is a baddie from MegaMan3.
I don't own or am associated with IP ownerships regarding the resources this was based on, capcom owns it. I just modeled it.

mechakkero

mechakkero.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

SoggyWombat