**Original files from the video as seen on TikTok!**
To connect the blade to the housing I used an M3x16 screw and a nut with pin set V1. You could also superglue it in with pin set V2 if you don't have any bolts lying around. 

Important: This model is only for fun and is not intended for any kind of harmful usage. Always ensure your 3D designs are used responsibly.

I used an M3x20 screw to attach the shell to the main body.

Gravity knife blades V2 and V3 have slits cut in them to add a blade I believe but I wouldn't recommend it since it is supposed to be a fidget toy and it wouldn't be safe.

Print 1 copy of each category using supports

I use pin set V1, Gravity knife main V2, Gravity knife blade V1 and either Gravity knife shell V1 or V2 when I make mine which gives it a smooth opening and closing action perfect for fidgeting.

Print orientation:
Print in whichever way you want, I printed with the point of the blade pointing upwards and the shell with the outside flat side on the base and the main body facing upwards as well.

Model version guide

**Pins**
Pin set V1: For use with bolts
Pin set V2: For use with superglue
 
**Main Body**
Gravity knife main V1: Larger-sized hole for the screw to attach the shell and a loop for a wrist strap.
Gravity knife main V2: Smaller-sized (M3) hole for the screw to attach the shell and a loop for a wrist strap.
Gravity knife main V3: Same size hole for the screw to attach the shell as V1 but no loop for a wrist strap.

**Blade**
Gravity knife blade V1: No slit cut into the blade.
Gravity knife Blade V2: Slit cut into the inner straight edge of the blade.
Gravity knife Blade V3: Slit cut into the angled edge of the blade.

**Shell**
Gravity knife shell V1: No rim around the hole for the screw. 
Gravity knife shell V2: Has a rim around the hole for the screw.

TikTok Gravity Knife Fidget Toy

Gravity knife blade V1.stl

Create your own custom coasters and drinks savers for anyone and any event.

You can change the size of the coaster to fit any standard-sized cup, the default size is designed to fit the average red solo cup!

Change the event and change the name and even change the year!

Use the drink saver and coaster to cover your drink to keep bugs out!

Customize your coasters and drink savers using the Fusion360 files and then print your custom models!
#PartyThangs

Customizable Coaster Drink Saver #PartyThangs

Happy Graduation Example Coaster.3mf

Customizable Coaster v3.stl

For standard-sized mason jars and pump soap dispensers.

Just unscrew the pump from your bottle of soap and screw it onto the jar adapter and turn your jar into a soap dispenser!

 

Jar Sizes
Large jar has top diameter of 82 mm

Small jar has top diameter of 68 mm

 

Current Models
24 SP415 (Dial Soap)

28 SP400 (Softsoap)

Soap Jar Adapter

Soap Jar Adapter Large Jar 24 SP415.STL

Soap Jar Adapter Edge Large Jar 28 SP400.STL

Soap Jar Adapter Edge Small Jar 28 SP400.STL

Soap Jar Adapter Small Jar 28 SP400.STL

Soap Jar Adapter Large Jar 28 SP400.STL

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6055635.

*not my model, just remixed to be printable with multiple colors*
Uses 3 colors

Remixed Pig for multi-colored FDM printing.

Original Artist info:
Pig for 3d printing.

Help me keep doing what I love! ❤
https://www.patreon.com/Infalivia

Check my instagram: @infalivia
https://www.instagram.com/infalivia/

Pig Colored

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6055453.

*not my model, just remixed to be printable with multiple colors*
Uses 4-5 colors

Remixed Avocado for multi-colored FDM printing.

Original Artist info:
Avocado for 3d printing.

Help me keep doing what I love! ❤
https://www.patreon.com/Infalivia

Check my instagram: @infalivia
https://www.instagram.com/infalivia/

Avocado Colored

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6054117.

*not my model, just remixed to be printable with multiple colors*
Uses 4 colors

Remixed meowth for multi colored FDM printing.

Original Artist info:
Meowth for 3d printing.

Help me keep doing what I love! ❤
https://www.patreon.com/Infalivia

Check my instagram: @infalivia
https://www.instagram.com/infalivia/

Meowth Multi Color

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6054088.

*not my model, just remixed to be printable with multiple colors*
Uses 5 colors

Remixed chicken for multi colored FDM printing.

Original Artist info:
Chicken for 3d printing.

Help me keep doing what I love! ❤
https://www.patreon.com/Infalivia

Check my instagram: @infalivia
https://www.instagram.com/infalivia/

Chicken Multi Color

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6054096.

*not my model, just remixed to be printable with multiple colors*
Uses 4 colors

Remixed duck for multi colored FDM printing.

Original Artist info:
Duck for 3d printing.

Help me keep doing what I love! ❤
https://www.patreon.com/Infalivia

Check my instagram: @infalivia
https://www.instagram.com/infalivia/

Duck Multi Color

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6054127.

*not my model, just remixed to be printable with multiple colors*
Uses 5 colors

Remixed Teenage Mutant Ninja Turtle for multi-colored FDM printing.

Original Artist info:
Teenage Mutant Ninja Turtle for 3d printing.

Help me keep doing what I love! ❤
https://www.patreon.com/Infalivia

Check my instagram: @infalivia
https://www.instagram.com/infalivia/

Teenage Mutant Ninja Turtles Multi Colored

Gauss Cannon tile for the game Hextraction by Zach Freedman. To use the tile, prime it by inserting two balls on one side of the magnet in the direction you want to launch. This tile only works once so after it is used you can use it as a trap or destroy the tile after it has done its thing.

You can also put 3 extra balls on one side instead of 2 so if you get rid of the trigger ball the tile can be used again right away

**Required Parts:**

1x Magnet from the list of designed sizes
2-3x Extra 3/8" or 10 mm steel bearing balls 

Current models have a snug fit so no glue is needed

**Magnet Sizes:**

**2 mm thick**
12 mm x 2 mm
15 mm x 2 mm
20 mm x 2 mm

**3 mm thick**
12 mm x 3 mm
15 mm x 3 mm
20 mm x 3 mm



Hextraction Gauss Cannon Tile

Hextraction Gauss Cannon 20 mm x 3 mm.STL

Hextraction Gauss Cannon 20 mm x 2 mm.STL

Hextraction Gauss Cannon 15 mm x 3 mm.STL

Hextraction Gauss Cannon 15 mm x 2 mm.STL

Hextraction Gauss Cannon 12 mm x 3 mm.STL

Hextraction Gauss Cannon 12 mm x 2 mm.STL

Fun hats for your Lego Minifigures! 
More hats to come!


Current hat list:
Frog Top Hat (With special guest Fred the Frog)



Special Thanks to:
Fred The Frog from: Xx_SushiCat_xX via https://www.thingiverse.com/thing:4838220 
Top Hat Model remixed from: @KevinWong via https://www.printables.com/model/196286 

Custom Lego Hats

Fun hats for your Lego Minifigures! 
More hats to come!



Current hat list:
Frog Top Hat (With special guest Fred the Frog)



Special Thanks to:
Fred The Frog from: Xx_SushiCat_xX via https://www.thingiverse.com/thing:4838220 
Top Hat Model remixed from: @KevinWong via https://www.printables.com/model/196286 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4581685.

Print this to mess with your friends! Feel free to turn it into a pin to pin on to clothing or your bag or turn it into a magnet!

I recommend printing with a low layer height and a higher infill to ensure the bars are strong and won't break off, especially if you plan on switching filament colors between the bars and the main base. 

I included 2 versions, one where the bars are extruded so you can change filament or paint the tops of the bars, and one where the bars are cut into the base so you could fill it with resin or paint or even nail polish.

Secret Spotify Code

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4577158.

print at any resolution or infill but I recommend using the slicer settings to remove supports inside the open areas of the C/A letter because they are hard to remove if included and they are not needed.

F yeah word illusion

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4577177.

Each peg can be reversed/flipped upside down and should be able to fit flush within the holes on the checker board. Each peg can also fit on top of the other for easy indication of being "kinged". Pegs should be printed with supports. I included a blank version of the peg so you can either print the peg as separate colors with no designs on top or add a design of your own.

Travel Checkers game (reupload)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3375033.

I made this tiny checkers game, the pegs fit upside down for storage and then right side up when playing, can either be the star player or the moon player and when a piece needs to be "kinged" the pegs (hopefully) fit on top of each other. Need to print 12 of each peg.

Travel checkers game

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4138113.

If you love Goldy Gopher of the University of Minnesota then this file is for you. Show your love for Goldy by printing this effigy of him. It took forever to get the original file to something decent. The file will be extremely tiny so just scale it up 10000x to get a part that fits comfortably in your hand, print at high detail and whatever infill you want. Now you can take Goldy anywhere!

This design is the first draft and will be refined later with more noticeable eyes and other features.

Created under the creative commons attribution license from this file https://sketchfab.com/3d-models/goldy-gopher-statue-b8f48abe6a534a3fb6f18a51a106d31d



Gopher, Goldy head

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3440845.

Project for my CSE (college of science and engineering) 3D printing class. I had to make a wall mountable key hook that could be attached to the wall with a command hook.

Umbrella keyhook

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2647983.

A key I designed to replace the one for my armoire that I lost. If your armoire has different dimensions than mine you may need to edit the design or file it down. Works best with a 99% infill to make sure it is sturdy enough to hold up against the mechanism.

Replacement Skeleton key for armoire

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6018084.

Modeled after an Aztec Death Whistle, this exudes a sound that isn't as deadly


Modeled after an Aztec Death Whistle, this model is similar but doesn't have the exact same screaming whistle sound, but still makes a fun whistle sound nonetheless. 
 
This model is in progress and I will continue to tune until I have a model that gives a great Aztec Death Whistle sound.

Print with supports touching buildplate only.

Aztec (not so) death whistle

Lilly pad by Jonathan_K1906 from Jumping frogs game: https://www.thingiverse.com/thing:2502657 
Fred The Frog Butt Thicc by TheBrotherBean:  https://www.thingiverse.com/thing:4887165

Original Fred by Xx_SushiCat_xX: https://www.thingiverse.com/thing:4838220 

Fred the Frog butt thicc and on a lillypad

thicc fred on lilypad.3mf

Mechanical engineer that makes silly models in my spare time.
___
Other accounts:
**Printables**: https://www.printables.com/@SmileyPrinter_292319
___
**Thingiverse**: https://www.thingiverse.com/smileyprinter/designs
___
**Cults3D**: https://cults3d.com/en/users/SmileyPrinter/creations

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Smileyprinter

Achievements

Sapling

Fan Favorite

Voyager