Wall storage system drawers - modular - makerspace or garage use, wall system, small parts, medium parts, storage, organizers

NODESTACK - DELTA PACK

Third element in the evolving NODESTACK system.

Interested to see more of my projects?
https://linktr.ee/smackmax 

Part of my own lab, iterating versions as i go along. In this release are the following files:

1010 CUBE D1 
1010 DRAWER D1 (Needs support - print in orientation as used)
1010 DRAWER CARD 
1020 CUBE (best to print with support, flat side to the build plate)
1020 Tilt Bin (Needs support - Slides into place with the nothes in 1020 CUBE file)
1020 Tilt bin deco PANELS (Friction fit - if loose use glue)

For other parts of the system:  https://thangs.com/designer/Smackmax/3d-model/NODESTACK%20-%20BASE%20PACK-1399749 

SYSTEM NOTES:
*Builds in 100 x 100 mm grid
*Make sure to test fit your pegs before printing all of them (different filament might need different tolerances - multiple files includes to test fit - switching orientation can help)
*JANKER file is avaible to give more grip when pulling (squeeze & pull)
*The hooks on the back are there incase i need them in the future
*Glue can be used to permanently lock them in place
*Uses a bunch of filament
*Test fitment on components is recommended
*I might improve the connection system



NODESTACK - DELTA PACK

CUBE TILT BIN.stl

NODE 1010 PEG (.05 Tol).stl

NODE 1010 PEG (.15 Tol).stl

NODESTACK - LIGHT DRAW PACK

Second drop in the evolving NODESTACK system.

Interested to see more of my projects?
https://linktr.ee/smackmax 

Part of my own lab, iterating versions as i go along.


10x20 cm expansion units now slot seamlessly into the NODESTACK grid.
Lightweight, support-free builds styled for labeling + part visibility (print transparent).

NEW ELEMENTS:

1020 FRAME

1020 DRAWER

1020 DOUBLE DRAWER

1020 KNOB
 
*Backwards compatibility with existing PEG + PANEL connections

ADDY ONE:
- 1010 CUBE D2
- 1010 DRAWER D2

Assembly: SEE GIF, SLIDE KNOB ON DRAWER, SLIDE DRAWER IN FRAME, NO SUPPORTS NEEDED (AUTO ORIENT)

SYSTEM NOTES:
*Builds in 100 x 100 mm grid
*Make sure to test fit your pegs before printing all of them (different filament might need different tolerances - multiple files includes to test fit - switching orientation can help)
*JANKER file is avaible to give more grip when pulling (squeeze & pull)
*The hooks on the back are there incase i need them in the future
*Glue can be used to permanently lock them in place
*Uses a bunch of filament
*Test fitment on components is recommended
*I might improve the connection system

NODESTACK - LIGHT DRAW PACK

1020 FRAME.stl

**NODESTACK - ORGANIZER SYSTEM**

the system will evolve over time.

Interested to see more of my projects?
https://linktr.ee/smackmax 

Part of my own lab, iterating versions as i go along.

**NODESTACK - BASE PACK **
First element of the NODESTACK system - Small parts drawers with styled front cards

**BASE PACK:**
- 1010 CUBE D4
- 1010 DRAWER D4
- 1010 DRAWER D4 CARD (in various styles)

**SYSTEM PACK**
- PEG (various tolerances - presure fit connector)
- JANKER (for pulling out PEG)
- BASE PANEL (variants for every orientation)

**ADDY ONE:**
- 1010 CUBE D2
- 1010 DRAWER D2

Assembly: Slide CARD in DRAWER, slide DRAWER in CUBE file, position next to PANEL or CUBE and insert PEG file.

*DRAWER files need support
*DRAWER files have room for a 0.4 mm text on the CARD file

SYSTEM NOTES:
*Builds in 100 x 100 mm grid
*Make sure to test fit your pegs before printing all of them (different filament might need different tolerances - multiple files includes to test fit - switching orientation can help)
*JANKER file is avaible to give more grip when pulling (squeeze & pull)
*The hooks on the back are there incase i need them in the future
*Glue can be used to permanently lock them in place
*Uses a bunch of filament
*Test fitment on components is recommended
*I might improve the connection system

NODESTACK - BASE PACK

D4 CUBE LW.stl

the system will evolve over time.

Part of my own lab, iterating versions as i go along.

FRAME PACK 01:

LARGE FRAMEPACK ADDITION TO NODESTACK SYSTEM SEE OTHER FILES IN THE SERIE FOR MORE INFO

-2020 D1 Frame (filament saving)

-1020 D2 Frame (Filament saving)

-2020 D4 Frame (filament saving)

-2020 D4 Frame with ''Cold Card Storage Box'' Slot (
https://thangs.com/designer/Smackmax/3d-model/Cold%20Storage%20%28Cards%2C%20Watch%20display%2C%20Generic%20storage%29-1098038 


-no supports

Interested to see more of my projects?

https://linktr.ee/smackmax

NODESTACK - FRAME PACK 001

2020 4D system filasave.stl

NODESTACK - DARK DRAW PACK

the system will evolve over time. This is a evolution of LIGHT STACK a earlier pack, (you can use the same frames!) i was not statisfied with the look so here is a new NODESTACK addition.

Part of my own lab, iterating versions as i go along.

-1020 Frame with 3 drawer sizes + top & bottom drawers
-1010 frame (uses drawers of 1020)
-2020 Frame with 3 drawer sizes + top & bottom drawers
-2010 Frame (uses drawers of 2020)
-No label support, clean look require label writer labels
-Has a rigde on underside of drawer for grab comfort
-Needs a bit of support on the drawers

Interested to see more of my projects? [HERE](https://linktr.ee/smackmax)

*Make sure to print bottom and top drawers!

Previous:[HERE](https://thangs.com/designer/Smackmax/3d-model/NODESTACK%20-%20LIGHT%20DRAW%20PACK-1412862)


GENERAL SYSTEM notes (SEE BASE PACK FOR FILES: [HERE](https://thangs.com/designer/Smackmax/3d-model/NODESTACK%20-%20BASE%20PACK-1399749)
*Builds in 100 x 100 mm grid
*Make sure to test fit your pegs before printing all of them (different filament might need different tolerances - multiple files includes to test fit - switching orientation can help)
*JANKER file is avaible to give more grip when pulling (squeeze & pull)
*The hooks on the back are there incase i need them in the future
*Glue can be used to permanently lock them in place
*Uses a bunch of filament
*Test fitment on components is recommended
*I expect to improve the connection system

NODESTACK - DARK DRAW PACK

DARKSTACK BOTTOM D.stl

FRAME 2020.stl

NODESTACK

Thangs Bundle

In this tier, you place your trust in the development of more projects by influencing the time I spend on designing objects. Your support contributes to scaling up operations and publishing more files. 

Together, we can empower Development and Manufacturing.

Commercial use is now allowed: You have permission to sell prints. Subscription benefits ("Commercial R&amp;D Partner") are active only when your subscription is active. Please ensure to add "Design by SMACKMAX" to the description of the item. However, selling of the files is not allowed.
 

Models for commercial use
Permission to use physical prints of selected exclusive models for commercial purposes during active membership. Whether a specific model can be used for commercial purposes will be clearly stated in the model details. Reselling the 3D model files is not allowed.

All the commerce

Acces to all the models and more! By joining this tier, you directly support my creative process, enabling me to dedicate more time and resources to designing and printing new projects. Together, we declare war on boring and mundane designs! I greatly appriciate your support and adds so much motivation! Not commercial