The classic Motorola Dynatac 8000x

With pushable buttons.

 
For assembly use glue.

Don't glue in the buttons. ;)

Motorola Dynatac 8000x

dial_face.stl

Eat your vegetable! No Problem!

Veggie cookie cutter - carrot, broccoli, bellpepper & peas

Veggie Cookie Cutter

carrot.stl

Bath basket V2 - I improved my previous model: no support, less material & faster print.

Layer height: 0.2mm

Outer Perimeter: 5

Infill: 15%

no support, no brim.

Bath Basket V2

basket_v3.STL

With PrusaSlicer 2.7 you can easily create a QR code cookie with your wish list on it. So Santa won't forget anything.

Cute otter, gift box and ornament motives available.

I used qrcode-monkey.com to generate the svg.

Note: you need to mirror the qr code.

Source file:
https://www.printables.com/model/505947-flexi-otter

Put your Wish List QR Code on a Cookie with PrusaSlicer 2.7

otter_cutter_blank.stl

Millennium Falcon Christmas Wreath Ornament

millenniumfalconwreath_v2.stl

This is my contest entry for the piggy bank contest.

This is a version of the Impossible Dovetail Box.

Only you will know how to open you piggy bank.

Print in two different colors to show case the dovetails.

You need four metal pins with D3 x 10 mm for assembly.

Like those on Amazon: https://www.amazon.de/BIGP-Zylinderstifte-Zylinderstift-Schranktrennw%C3%A4nde-Schaftbefestigungen/dp/B0B61R9CZT/ref=sr_1_5?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=VV93YNPZLANP&keywords=zylinderstift&qid=1701031709&sprefix=zylinderstift%2Caps%2C206&sr=8-5

To assemble put two pins into the holes of the lid in which they fully disappear.

Do the same at the base.

Align the two parts above each other in a 45° angle and twist to close.

Shake the box to lock.

Import the 3mf-file as separate parts into PrusaSlicer.

Impossible Dovetail Piggy Bank

piggybank-v6.3mf

The print of the calibration cube has horribly gone wrong!

Now you are being attacked by the horrific cubimal!

To stop it you have to slay it with four swords.

Can you find the right order of the swords and save the day?

Printed in PLA.

The cube body needs support to prevent the holes on the side from sagging.

The sword handle needs to be printed four times.

Glue is needed for assembly.

Glue the teeths first to the cube body and head then glue the tongue to connect head and body.

Sword blades have poka-yoke features which guide the glueing to the handle.

Inspiration from 9 sword puzzle solved by Chris Ramsay and hinged cube by apepbiz.

I added the step-file of the whole assembly.

So it can be edited and remixed as you like.

Slay the Horrific Cubimal!

cubimal.step

Do you also dislike how fiddly it is to remove the IKEA Patrull electrical socket cover.

Those handles provide you better grip of the socket cover.

Glue it to one of the socket cover.

No support needed.

Easy Removal IKEA Patrull Socket Cover

patrull_handle_v2.stl

Cookie cutters - wrench, wirecutter and allenkey.

Cookie Cutters - Tools

Allenkey.STL

Wedding Cake Topper (Mrs&Mrs, Mr&Mr, Mx&Mx, Mrs&Mr)

Mrs&Mrs.3mf

We placed a mobile onto the IKEA Mosslanda shelf which is mounted above our changing table.

The mobile provides a lot fun and smile for our baby while we are changing the diapers.

But because the rim of the shelf is so small the mobile clamp had now much meat to grip on.

We were afraid that the mobile could get loose and crash down while trying to wind up the music box.

Now the brackt creates the much needed support for the mobile clamp.

You just need to sandwich the shelf rim between the disc and bracket and screw the clamp on it.

I have two designs with a two-part and single part bracket.

I think this design will fit most common mobile screw on clamps.

Hope this will help people with similar problems.

Mobile Bracket for IKEA Mosslanda Shelf

Mobile_Clamp_Disc.3mf

This is my remix of Flowalistik's 18x13cm letter board.

That's the size which still fits on my Prusa Mini.

I added pegs on the backside of the frame as feet so the board can stand on its own.

And I also added few more letters like the German Umlaut. :)

You can get the full alphabet from Flowalistik original model.

Have fun printing.

Letter Board - with Feet & Umlaut

dot.3mf

"New card. Picked 'em up from the printers yesterday. That's white. And

the lettering is something called Neohead."

These are filament swatches in business card style with a little nod to

American Psycho. :)

Business Card Style Filament Swatches

BusinessCard_PLA.3mf

Description:

This snap-on mod allows the Xbox One controller to be placed down and

played from top-down.

This mod was inspired by and is a remix of Akaki's Snap-On Xbox

Gamepad HOTAS Joystick:

https://www.thingiverse.com/thing:4612448

The contoller can be snapped on the base/mount assembly and placed

down on the flat surface. The joysticks and buttons are extended outwards

and enlarged for easier reachability. The levers for the RB, RT, LB & LT

allow them to be pressed from top-down.

As I am not a gamer I think that this mod can be further optimized. I would

really apprecriate your feedbacks and shared makes. Thanks a lot! :)

Assembly:
https://www.printables.com/model/111335-xbox-one-controller-mod-top-down-play/files

XBox One Controller Mod - Top-Down Play

Base_left.3mf


**Summary**
NIERBO Nightlight Remote Holder.

Cutouts on the backside were implemented to reduce amount of supports

needed.

Printed with PLA, 0.2mm layer height, 3 outer walls and supports only on

print bed.

NIERBO Nightlight Remote Holder

NightLightRemote.stl

**Summary**
I designed Malmö's landmark in Fusion 360 and it was a lot of fun.

Especially the 90° turn of the building. The windows not so much :)

I scaled the print to 180% because of the thin beams at the pointy side of

the building and cut in in half so it would fit onto my Prusa Mini+.

At 180% scale to beams came out very thin and unfortunately broke off

when removing the support stuctures.

I had to glue them back on.

Think a scale to 200% might have been better.

Scale, cut and slice as your liking. Happy printing :)

**Print Settings**
Printer brand:
Prusa

Printer:
MINI+

Rafts:
No
Supports:
Yes
Resolution:
0.1
Infill:
10%
Filament brand:
3DJake rePLA

Filament color:
white

Filament material:
PLA

Notes:
Outer perimeter: 4

Turning Torso of Malmö

Turning Torso v32.stl

**Summary**
The wet wipes needed a place so I created this holder fitting to the toilet

paper stand.

It is a two part print and M3 threaded inserts were used to connect them

and also to fastened the holder to the stand.

The holder was printed in PLA.

Print was done with a 0.4mm nozzle, 0.2mm layer height, five outer

perimeters and 10% infill. No supports needed.

**Print Settings**
Printer brand:
Prusa

Printer:
MINI+

Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament brand:
Prusament

Filament color:
black

Filament material:
PLA

Wet Wipe Holder for Toilet Paper Stand

Toilettenfeuchttuchhalter v2.3mf

**Summary**
Update:

Improved version now online.

No support, less material & faster print.

Check it out: 
https://thangs.com/designer/Slic%2Fd%20D%2Fsign/3d-model/1047123
___________________________________________________

Our old bath basket broke and after we did not find an adequate

replacement which could hold all our bottles and did not take up too much

space I decided to print our own.

This was my first design in Fusion 360 and one of my first prints on my

Prusa Mini+.

Print sliced in PLA with the standard Prusa setting for 0.20mm Quality and

with supports everywhere.

**Print Settings**
Printer brand:
Prusa

Printer:
MINI+

Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament brand:
Prusament

Filament color:
black

Filament material:
PLA

Bath Basket with Razor Holder

Badkorb v1.stl

**Summary**
The solarpanels of the fairy light chains IKEA SOLARVET only came with

stakes which you put into the of earth of planting pots. I did not want that

and designed the two brackets. One for the balkony railing (40x40mm)

and one for the IKEA Satsumas ladder.

Printed in PLA on a Prusa Mini+. No supports needed.

**Print Settings**
Printer brand:
Prusa

Printer:
MINI+

Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament brand:
Prusament

Filament color:
black

Filament material:
PLA

Slic/d D/sign

Achievements

Seedling

Debutant

Pinned models

Letter Board - with Feet & Umlaut

Cookie Cutters - Tools

Slay the Horrific Cubimal!

Millennium Falcon Christmas Wreath Ornament

Motorola Dynatac 8000x

Veggie Cookie Cutter

Bath Basket V2

Put your Wish List QR Code on a Cookie with PrusaSlicer 2.7

Millennium Falcon Christmas Wreath Ornament

Impossible Dovetail Piggy Bank

Slay the Horrific Cubimal!

Easy Removal IKEA Patrull Socket Cover

Cookie Cutters - Tools

Wedding Cake Topper (Mrs&Mrs, Mr&Mr, Mx&Mx, Mrs&Mr)

Mobile Bracket for IKEA Mosslanda Shelf

Letter Board - with Feet & Umlaut

Business Card Style Filament Swatches

XBox One Controller Mod - Top-Down Play

NIERBO Nightlight Remote Holder

Turning Torso of Malmö

Wet Wipe Holder for Toilet Paper Stand

Bath Basket with Razor Holder

Solarpanel Bracket for fairy light chain IKEA SLOARVET