These are extra Spacers for the Standoffs of the ImpulseRC Apex EVO 5" Frame. The make more room for the FC and ESC Stack.

I printed them with PLA but PETG or TPU should work as well.

ImpulseRC Apex EVO 5" Extra Standoff Spacers

ImpulseRC Apex EVO 5inch normal Extra Spacer.stl

This is a Walksnail Moonlight Antenna and ELRS RP1 V2 Nano Receiver Antenna mount for the ImpulseRC Apex EVO 5". The ELRS Reciever mount has got to be printed twice and the Antenna then gets put between them.

I printed the ELRS mount with PLA but you can probably print it in PETG or TPU as well. The Walksnail Moonlight Antenna Mount is printed with TPU and i wouldnt reccomend to print it with PLA I first did that myself but even when only gentely crashing it broke. I dont know how PETG would perform but TPU is probably the most durable in this case. 

If you FC and ESC Stack doesnt fit the frame or it doesnt have enough space like in my case with the Speedybee F7 Stack, I made the model with some extra Standoff Spacers to make room for the FC and ESC stack [here](https://thangs.com/designer/Siri/3d-model/%2BSpacers%20ImpulseRC%20Apex%20EVO%205%22%20Walksnail%20Moonlight%20Antenna%2C%20ELRS%20RP1%20V2%20Nano%20Receiver%20mount-1138182) and the Spacers alone you can find [here](https://thangs.com/designer/Siri/3d-model/ImpulseRC%20Apex%20EVO%205%22%20Extra%20Standoff%20Spacers-1138230).

ImpulseRC Apex EVO 5" Walksnail Moonlight Antenna, ELRS RP1 V2 Nano Receiver mount

ImpulseRC Apex EVO 5inch Walksnail Moonlight Antenna for Spacers mount.stl

!WARNING! this will not fit with the standard Apex EVO frame you need the included 3d printed extra Spacers wich will make enough room for the FC and ESC Stack. [This](https://thangs.com/designer/Siri/3d-model/ImpulseRC%20Apex%20EVO%205%22%20Walksnail%20Moonlight%20Antenna%2C%20ELRS%20RP1%20V2%20Nano%20Receiver%20mount-1138208) is the Model made for use without extra Spacers.

This is a Walksnail Moonlight Antenna and ELRS RP1 V2 Nano Receiver Antenna mount for the ImpulseRC Apex EVO 5" with extra Spacers to make more space for the FC and ESC Stack. The ELRS Reciever mount has got to be printed twice and the Antenna then gets put between them. The Long Spacer got to be printed twice for the front and the normal Spacer got to be printed 6 times.

I printed the Spacers and ELRS mount with PLA but you can probably print them in PETG or TPU as well. The Walksnail Moonlight Antenna Mount is printed with TPU and i wouldnt reccomend to print it with PLA I first did that myself but even when only gentely crashing it broke. I dont know how PETG would perform but TPU is probably the most durable in this case.

[This](https://thangs.com/designer/Siri/3d-model/ImpulseRC%20Apex%20EVO%205%22%20Extra%20Standoff%20Spacers-1138230) are the Spacers alone.

+Spacers ImpulseRC Apex EVO 5" Walksnail Moonlight Antenna, ELRS RP1 V2 Nano Receiver mount

ImpulseRC Apex EVO 5inch Walksnail Moonlight Antenna mount.stl

This is a WS-181 GPS front mount for the ImpulseRC Apex EVO 5" frame. It is front mounted because on the back i got no satellites in combination with the Walksnail Moonlight but on the front I get up to 22 satellites and GPS rescue works beatifully now.

Mine is printed with PLA but PETG and TPU will probably work as well.

ImpulseRC Apex EVO 5" WS GPS-181 Mount

ImpulseRC Apex EVO 5inch WS GPS-181 Mount.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Siri

Achievements

Seedling

ImpulseRC Apex EVO 5" Extra Standoff Spacers

ImpulseRC Apex EVO 5" Walksnail Moonlight Antenna, ELRS RP1 V2 Nano Receiver mount

+Spacers ImpulseRC Apex EVO 5" Walksnail Moonlight Antenna, ELRS RP1 V2 Nano Receiver mount

ImpulseRC Apex EVO 5" WS GPS-181 Mount