I noticed the footrest of the recliner on my couch wasn't going all the way in anymore. Found this bracket was broken. This locks the footrest against the power moved arm piece (wow this is difficult to describe) and lets your footrest retract all the way again. Very easy to break if you try to lower the footrest and you have something in the way of it closing all the time.... like a lazy cat.

La Z Boy Couch Recliner Footrest Spacer Lock

LaZ Left.stl

This is 1/4 of a dryer extension for the Nesco 1010, 1040. Great for using your dehydrator to dry filament. Obviously just print 4 of them from PETG, ABS, ASA, or some other higher-temp filament, as PLA has too low a glass transition temperature for the heat this dryer produces. The small ears on the end of the model break off easily and just aid in keeping the model adhered to the build plate, and keeping the corners intact. Locating dowels to aid in assembly.
Minimum build plate size is 235x235, perfect for your Ender 3 or clone!

Nesco Dehydrator Dryer Extension

This is 1/4 of a dryer extension for the Nesco 1010, 1040. Great for using your dehydrator to dry filament. Obviously just print 4 of them from PETG, ABS, ASA, or some other higher-temp filament, as PLA has too low a glass transition temperature for the heat this dryer produces.

Just a funky holds-too-many-things for my Gridfinity desk. Holds a bunch of thumb drives, SD whatever cards, MicroSD whatever cards.... Yeah. It's awfully busy but that's half the fun.

Gridfinity USB Thumb Drive SD MicroSD TF SDXC SDHC SDUC T-Flash TransFlash holder

This filter adapter has a larger opening, perfectly lining up with a K&N filter. It requires no supports, as they are built-in to the model. I printed out of Carbon Fiber reinforced PETG, and it has been holding up perfectly. Recommend ABS, ASA, Nylon, or CFPETG or something similarly hi-temp. Does not use the stock snorkel. I also recommend getting a tune after this, as the bike runs lean enough stock. 
This should also fit the Tenere (Ténéré) and FZ-07 - Pretty much anything that uses the CP2 engine.

Yamaha MT-07 CP2 Big Bore Filter Plate

This filter adapter has a larger opening, perfectly lining up with a K&N filter. It requires no supports, as they are built-in to the model. I printed out of Carbon Fiber reinforced PETG, and it has been holding up perfectly. Recommend ABS, ASA, Nylon, or CFPETG or something similarly hi-temp. Does not use the stock snorkel. I also recommend getting a tune after this, as the bike runs lean enough stock. 

 Simple sketch I modeled up based on https://www.thingiverse.com/thing:1955893. I just made it thicker to mount directly to a wall and recessed some screw holes. Very nice way to mount batteries to the wall or under your workbench to store them in otherwise wasted space.

DeWalt 20v and 60v battery holder

Just a simple decorative cover for the Ender 3 Pro PSU. 

Ender 3 Pro Power Supply Decorative Cover

I got sick of the bottom of my LTT Water bottle scratching my desk, so I made a protector that fits snugly when printed with TPU.

LTT Water Bottle Protector/Insulator

Needed a good way to store my extra thumb panels for my Razer Naga Pro. There's spots for magnets to hold the panels in securely. First attempt, so I may make improvements in the future.
I used stock settings on a very clapped out Ender 3 Pro. 
Used https://www.thingiverse.com/thing:4930679, so most of the credit goes to NerdandoCom.
Please notice me, Zack-Senpai! uwu~
https://thangs.com/designer/ZackFreedman

Gridfinity Razer Naga Pro Trinity Thumb Side Holder

Gridfinity Razer Naga Pro Holder Base 1x3.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Shibbypoopalot

Achievements

Explorer

Seedling

Debutant