SQ10 Electronics Mounting System

SQ10 Base Plate 200x200.3mf

GF2x3 Marker Rack

2x3-35MarkerRack.3mf

GF2x3 Drafting Rack

I am working on a series of 2 unit x 3 unit Gridfinity tool trays, to fit into my Dewalt T-Stak series tool box, as well as elsewhere. I have added a 12mm magnet hole to the center of every square for an optional countersunk screw magnet.

This GF2x3 fits all of my usual go-to scribble sticks and measuring sticks (aka pencils, pens and rulers). There is an additional pencil cup that you can pop in to protect mechanical pencils. It lets the pencil rest on the metal ferrule, not on the lead. 

2x3-DraftingRack.3mf

GF2x2DrillCaddy.3mf

Gridfinity Drill Caddy, Fits 3/8" down to 1/16" drill bits, 3 Hex step drills, a hex chamfer bit, a center punch, a hole marker, and a set of hex hole punches. This was 99% of everything I was reaching for when drilling holes on my various hobby stuff. 
It's based on a Gridfinity 2 unit x 2 unit base, with the addition of a 12mm screw on counter sunk magnet in each unit (my preference. All of the tool holes are meant to be loose fitting, so you don't have to wrestle them in or out. Most of the tools can be bought on Amazon, or on Harbor Freight Tools

GF2x3WeraHexTray.3mf

I am working on a series of 2 unit x 3 unit Gridfinity tool trays, to fit into my Dewalt T-Stak series tool box, as well as elsewhere. I have added a 12mm magnet hole to the center of every square for an optional countersunk screw magnet. 

Creality Sermoon D1 threaded adjustable Z Limit System

SermoonD1ZLimitBracket.3mf

Sermoon D1 Tool Kit

Simple and compact little tool kit that sits inside of a Creality Sermoon D1, and uses all of the included tools, plus space for a glue stick and extra nozzles. The bottom has a 1x3 Gridfinity pattern on it. I have a small metal plate that came with a cell phone mag holder, stuck to the printer to help hold the tool kit in place. 

(broken drill) Tip Jar

TipJarCAT40.5.3mf

iFixIt Manta Hinge and Clasp

MantaHingeLower.3mf

Assorted Tool Tray, Gridfinity 2x4 base

This is a tray I doodled for holding all of the usual tools for working on my 2020 based Hobby CNC systems, Laser etcher, 3D printer, etc. It's based on a 2x4 Gridfinity foot print. I added 10mm magnet holes for variety ( I had a bunch). Socket holes on the left fit most 1/4" square drive sockets and Hex bits. Parts tray in the center. Then L wrenches and hex driver holes on the right, as well as a spot for a mini adjustable wrench, and pair of nippers. All holes are intended to fit the tools loosely. I don't like having to wrestle the tray for a tool while I'm holding something in place. 

P42AssortedToolTray.stl

P42 Colosseum Card Holder.stl

This is a playing card holder I designed. I have a hard time holding cards for any length of time, and have tried other card holders. This one is a bit bigger, and offsets the back row higher up so you can see them easier. It's designed to fit around a standard dinner plate too. 

Ender3 40mm Quadrail Foot

one of my older designs:

This is a foot for my Ender 3, it slides into the T Slots, and you pop a foam golf ball into it. The foam golf balls seem to hold up well. I've had mine riding on these same 4 balls for over a year now. This also raises the whole machine up a little and makes it stay in place really well. 

Ender340mmQuadrailFoot.stl

Ender 3 Lefty drawer

E3V2LeftyDrawerOuter60D.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

Shayne the bald Squatch

Achievements

Seedling

Debutant

Explorer