tracking pixel
Shack3d P

SHELF PINS

by
Shack3D_print
Follow
Follow
Remix Model
Shack3D_print
Shack3D_print
|
Image 5 of 7
SHELF PINS 3d model
Shack3D_print
Shack3D_print
|
Image 5 of 7
SHELF PINS 3d model
2D
3D
Makes
SHELF PINS 3d model
SHELF PINS 3d model
SHELF PINS 3d model
SHELF PINS 3d model
SHELF PINS 3d model
SHELF PINS 3d model
SHELF PINS 3d model
This model is restricted by licensing terms. 

3D printing meets wood.

Hi friends, we are excited to present to you our new project.

We decided to combine the functionality of 3D printing with recycled wood to give it new life.

Our first project is this simple shelf, created through the use of recycled plywood panels and wooden rods.

For the project we used: 4 wooden rods with a diameter of approximately 22mm and 3 panels that we cut to the size we needed.

We have created 3 types of pins:

  • one for the rods, which connect to the panels using screws,
  • feet for the rods.
  • Wall mount.

The prints of the 3d models that you can see on the shelf is created by us too. Hope you like it!

As always we thank you for the support you give us, if you like our designs follow us and support us also on our social pages (Instagram and tiktok, X) Shack3d_print. We will be happy to see the result of your prints, share the photos with us by tagging us on our social pages, don't be shy. A thousand thanks.

Love, Marina from Shack3d_print.

3D PRINTING SETTINGS FDM 3D PRINTED WITH BAMBULAB P1S SLICER: BAMBUSTUDIO Filament: pla matte from bambulab too Temp: 220°C Infill: 10% Support: yes layer height: 0.2 Nozzle: 0.4 Wall: 3 Top/Bottom: 3


19 Likes30 DownloadsJune 17, 2024


19 Likes30 DownloadsJune 17, 2024
This model is restricted by licensing terms.