Introducing the Ultimate Lid Extension for Your Creality K1 & K1C 3D Printer in VERSION 2!
Welcome to Sektor 7 Studios, where innovation meets performance. We’ve meticulously crafted a high-quality lid extension (Raiser) for your Creality K1 & K1C 3D printer, designed to elevate your printing projects to the next level.

Prepare to be amazed by our latest breakthrough: an exceptional lid extension (Raiser) for your Creality K1 & K1C 3D printer, now boasting an innovative SWING-ARM-DESIGN. Experience unparalleled convenience with enhanced mobility for the filament tube and power cable, eliminating the annoyance of chain slapping against the printer. Elevate your printing experience to new heights of precision and ease.

**THIS IS VERSION 2 --> WITH SWING-ARM**

**We have designed two different versions:**

- Version 1 (without SWING-ARM) --> https://www.crealitycloud.com/model-detail/660c1ef234034d9895056fb2
    Version 2 (this one, Upgraded version with SWING-ARM, for advanced users)

--> We have also created a version that works without bearings in the SWING-ARM. However, we recommend installation with bearings. If you decide to install without bearings, please select the correct mounting instructions.
Both versions have their advantages, choose the one you like the most!
In the "Makes" we briefly introduce you to the raiser in a video.

**OUR STL FILES OFFERS YOU:**
-     Perfect Fit on Creality K1 & K1C
-     Enhanced Functionality
-     Improved Print Quality
-     Easy Installation
-     Noise reduction
-    More moving space for the Bowden tube
-    Air supply regulation & indirect control of the temperature
-    Bowden tube passage to the back and side (you can choose)
-    Detailed assembly instructions are supplied as a download
-    Detailed print settings are supplied as a download
-    More mobility of the filament tube and the power cable (no annoying slapping of the chain against the printer)
-    Side filament outlet
-    Filament sensor is located inside the raiser

**THE FOLLOWING PARTS MUST BE PRINTED:**
-     PART_RAISER_K1 (3 TIMES)
-     PART_BACK-RIGHT_RAISER_SWING-ARM_K1 (1 TIME)
-     SLIDER (8 TIMES)
-     CONTROLLER_WITH_LOGO (8 TIMES) or CONTROLLER_WITHOUT_LOGO (8 TIMES)
-     DRIVE-SHAFT (1 TIMES)
-     HOLDER_SWING-ARM (1 TIMES)
-     SWING-ARM (1 TIMES)
-     WASHER_FILAMENT-SENSOR (1 TIMES)
-     CABLE_CLIP (3-5 TIMES)
-     BEARING-COVER_TOP (3-5 TIMES)
-     BEARING-COVER_BOTTOM (3-5 TIMES)
-     SWING-ARM_CLIP (2 TIMES)

**PRINT SETTINGS**
_(Please read the INSTRUCTIONS and the PRINT SETTINGS)_

- Printing Material: PLA/PETG/ABS/ASA (heat-resistant filaments are recommended, but not absolutely necessary)
- Infill: 15%
- Layer Height: 0.2mm (Attention! CONTROLLER + SLIDER with 0,1 mm or 0,16 mm layer
- Walls: 2
- Support Structure: none support needed (we have modeled the supports for you in the model, these must be removed with a click after printing)
- Recommendation: BRIM with 5 lines, 100mm/s print speed (Attention! CONTROLLER with minimum 8 lines)

**
If you have any questions feel free to contact us. You can contact us under the following email:**
- support@sektor7.studio

We are happy about every new follower.

CREALITY K1 & K1C RAISER / DECKEL / TOP COVER / UPGRADE (VERSION 2)

PART_RAISER_K1 (3x).stl

You are welcome to follow us on Instagram (sektor7_studios)

Introducing the Ultimate Lid Extension for Your Creality K1 & K1C 3D Printer! (no supports needed)

Welcome to Sektor 7 Studios, where innovation meets performance. We’ve meticulously crafted a high-quality lid extension (Raiser) for your Creality K1 & K1C 3D printer, designed to elevate your printing projects to the next level.

**THIS IS VERSION 1 --> WITHOUT SWING-ARM**

**We have designed two different versions:**
- Version 1 (this one, without SWING-ARM)
- Version 2 ( Upgraded version with SWING-ARM, for advanced users)

Both versions have their advantages, choose the one you like the most!

**OUR STL FILES OFFERS YOU:**
- Perfect Fit on Creality K1 & K1C
- Enhanced Functionality
- Improved Print Quality
- Easy Installation
- More moving space for the Bowden tube
- Air supply regulation & indirect control of the temperature
- Bowden tube passage to the back and side (you can choose)
- Detailed assembly instructions are supplied as a download
- Detailed print settings are supplied as a download

**THE FOLLOWING PARTS MUST BE PRINTED:**
- PART_RAISER_K1 (3 times)
- PART_BACK-RIGHT_RAISER_K1 (1 time)
- TOP-COVER_LOCK (1 times)
- SLIDER (8 times)
- CONTROLLER_WITH_LOGO (8 times) or CONTROLLER_WITHOUT_LOGO (8 times)

**PRINT SETTINGS**
(Please read the INSTRUCTIONS and the PRINT SETTINGS)

Printing Material: PLA/PETG/ABS/ASA (heat-resistant filaments are recommended, but not absolutely necessary)
Nozzle: 0.4mm
Infill: 15%
Layer Height: 0.2mm (Attention! CONTROLLER + SLIDER with 0,1 mm or 0,16 mm layer height)
Walls: 2
Support Structure: none support needed (we have modeled the supports for you in the model, these must be removed with a click after printing)
Recommendation: BRIM with 5 lines, 100mm/s print speed (Attention! CONTROLLER with minimum 8 lines)

**The Raiser has so far been printed on the following printers. Both could be used to print without support structures:**
- K1 Max
- K1
- K1C

**If you have any questions feel free to contact us. You can contact us under the following email:**
- support@sektor7.studio

We are happy about every new follower. 

CREALITY K1 & K1C RAISER / DECKEL / TOP COVER / UPGRADE (VERSION 1)

PART_BACK-RIGHT_RAISER_K1 (1x).stl

SLIDER + CONTROLLER.3mf

Hello everyone!

I’m thrilled to introduce you to our innovative modular "**MAGNET REVOLVER**" in a unique revolver design. This creation is born from my need to efficiently store magnets of various sizes, something I struggled to find in existing solutions on MakerWorld. Taking matters into my own hands, I designed a storage system that is both practical and visually appealing.

The design allows magnets to slightly protrude, enabling easy access—you can simply push up the desired magnets with one finger and retrieve them from the revolver.

We have put together a short video of the assembly on our Instagram profile: https://www.instagram.com/p/C74mmSto2su/

 
**Key Benefits of the Magnetic Revolver Organizer:**

- Space-saving: Optimized design ensures minimal space usage.
- Modular: Customizable with various sizes and inserts to suit your needs.
- Bearing-free: No additional components required.
- Dual-purpose Rotating Mechanism: Functions as a storage solution and a fidget toy—an accidental but delightful discovery.

 Follow us on Thangs and Patreon for more elegant and functional designs.

Support us on Patreon to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere:

https://www.patreon.com/sektor7_studios

Greetings

Leon from Sektor 7 Studios

Magnet Organizer / Dispenser / Revolver (modular)

MAGNET_REVOLVER_MIDDLE-PART.stl

KNOB.stl

MAGNET_REVOLVER_BASE.stl

MAGNET_REVOLVER_SIDE-PART (D3 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D3 - 4x).stl

MAGNET_REVOLVER_SIDE-PART (D3,D4 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D3,D4 - 4x).stl

MAGNET_REVOLVER_SIDE-PART (D4 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D4 - 4x).stl

MAGNET_REVOLVER_SIDE-PART (D5 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D5 - 4x).stl

MAGNET_REVOLVER_SIDE-PART (D5,D6 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D5,D6 - 4x).stl

MAGNET_REVOLVER_SIDE-PART (D6 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D6 - 4x).stl

MAGNET_REVOLVER_SIDE-PART (D7 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D7 - 4x).stl

MAGNET_REVOLVER_SIDE-PART (D7,D8 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D8 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D9 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D9,D10 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D10 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D12 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D12,D14 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D14 - 2x).stl

MAGNET_REVOLVER_SIDE-PART (D15 - 1x).stl

MAGNET_REVOLVER_SIDE-PART (D17 - 1x).stl

MAGNET_REVOLVER_SIDE-PART (D18 - 1x).stl

MAGNET_REVOLVER_SIDE-PART (D20 - 1x).stl

3D PRINTING FILES FOR HOME AND LIVING & MORE

[links.sektor7.studio](https://lnk.bio/sektor7_studios)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Sektor 7 Studios

Achievements

Seedling

Trailblazer

Pinned models

Magnet Organizer / Dispenser / Revolver (modular)

CREALITY K1 & K1C RAISER / DECKEL / TOP COVER / UPGRADE (VERSION 2)

CREALITY K1 & K1C RAISER / DECKEL / TOP COVER / UPGRADE (VERSION 1)