Chemical Holder.stl
ABOUT: Didn't want to fuss with Gridfiniy and all the magnets.
FEATURES: The large round 46mm insert is for a 8.oz Lucas White Lithium Grease The medium 43mm insert are for a 4.oz liquid Super Lube. The smaller 34mm insert is for a 2.oz Starbond super glue. The small 32mm inserts are for 1.oz needle bottles, and a 60.mL Bambu Lab Liquid Glue. The long horizontal insert is for a standard 7g/0.24 oz glue stick. There are also inserts for the StarBond Glue's nozzles, pin cap, and lid.
**HARDWARE NEEDED: ** (4) 13 mm rubber feet for anti-skid purposes.
**PRINTING SUGGESTIONS: ** I would use PLA. It shouldn't take more than 3 Hours. I would do 10 Hex pattern infill. Supports are optional for the feet holes on the bottom. No brim is needed because of the large print surface.
DISCLOSURES: No accessories included.
FINAL THOUGHTS: Maybe someone will find this useful.
Cheers!
Visit my blog: https://www.scwd.us
Visit my YouTube Channel: https://www.youtube.com/@SCWD_US
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition