Hey, this is my Star Lamp. It's Huge with 42 cm diameter but it can be scaled to your needs.
You will need 19 pieces to assemble this. If you only want to print a big star then you will need 20 pieces.
Print Settings: Use 100% concentric infill. You can do without, but the infill might shine though and that doesn't look as pretty. You can use supports, but with PLA they should be unnecessary on most printers.
Assambly: Just snap all pieces together. If you need a model On how the Star shiuld look like in the end, you can print this Star first: https://thangs.com/designer/Ri0m0/3d-model/Icosaeder%20Star%20Single-975038?manualModelView=true&source=All+Files It's the exact same model and use the same Assembly system just smaller, so it should be good practice and a reference for the big lamp.
https://www.youtube.com/watch?v=orpHnSXeyAk
Here is a Video on how to assemble the little brother of this star. Both stars use the same Assembly system, so you can use this to assemble this lamp too. Make sure that the socket with the bulb is inside the Star. Take a look at the last image to see what I mean.
For the socket, I used this:
EU Socket: https://ebay.us/PRcPvm
US Socket: https://ebay.us/hBRN1i
and this is my Bulb
You support me by using this link, btw.
There is one thing I need to add. Don't hang this thing by the Cable, please. Cables are not meant for that. It will snap and that could lead to a fire or something similarly bad + your star will get destroyed.
That's it. Start Printing now. And don't forget to give The model a like that helps out tremendously.