wombot-exilis-xl-carriage-upgrade.stl

This is my redesign of the complete extruder carriage setup for the Wombox Exilis XL, which includes the extruder carriage, part cooling fan, and BL Touch mount. I may be releasing these parts individually so that you can print the parts by themselves if you don't need the complete setup.  To use this part you will also need to have some M3x4mm brass inserts as I have used these to allow you to attach the BL Touch and Parts Cooling Fan Mount.

wombot-exilis-xl-motor-bracket-y-axis.stl

Here I have the Y Axis (Bed Motor) bracket for the Wombox Exilis XL. This model is best printed with 100% unfill for strength. 

wombot-exilis-xl-motor-bracket-z-axis-right-side.stl

Here I have the Z Axis Right side bracket for the Wombox Exilis XL. This model is best printed with 100% unfill for strength

wombot-exilis-xl-bl-touch-mount.stl

BL Touch mount to go with Wombot Exilis XL 3D printer.

Retro Joystick - Amiga or Atari

Retro Joystick with two buttons for the Amiga or Atari line of computers.  I have included 3 files, one if both halves, one is the top and the other is for the bottom.  This will allow those with smaller beds to print this part.  I printed this in ABS, and this will require supports for the top half.

amiga-joystick-stl.stl

google-home-mount-stl.stl

Wall Mount to suit the Google Home smart device.  This print will require 2 x 10mm magnets to allow you to attach the bottom part to the top.  Due to the length of the cable that comes with the Google Home unit I decided to print this in two parts, with the excess cable being able to be hidden away in the base.  I have included a mounting system which will require 2 screws to attach the mount to the wall and the mount then attaches to this.

amiga2000-card-bracket-stl.stl

This is a bracket for the Amiga 2000 which is located at the front on the case and is used to support the add in cards on the Amiga.

n64-modded-backpanel-stl.stl

Here is a backpanel for the N64 for those who wish to place a Raspberry Pi3 into a Nintendo 64 Case. Included is the following items

Backpanel

Plugs for front USB ports

MicrosUSB extension card reader holder that goes into the expansion pack slot

n64-microsd-card-reader-mount-stl.stl

n64-modded-front-usb-ports-plug-stl.stl

Here is a backpanel for the N64 for those who wish to place a Raspberry Pi3 into a Nintendo 64 Case. 


RobsVirtualCave

Achievements

Seedling

Explorer