This is a RS775 12v DC Motor Holder for Drilling Stand Setup. It can hold the motor tightly by using Nut and Bolt. It has 3 Holes to Hang on the three 5.6 mm Rods. And also a Slot to Fix the Trapezoidal Nut to move this Holder Up and Down Precisely using an 8mm Trapezoidal Screw.

DrillMotorHolder.stl

This is a RS775 12v DC Motor Holder for Drilling Stand Setup. It can hold the motor tightly by using Nut and Bolt. It has 3 Holes to Hang on three 5.6 mm Rods. Ans also a Trapezoidal Nut fixing Slot to move this Holder Up and Down Precisely.

This is the Base to support the Three Rods and hold the Drill Motor Holder firmly so that it can be moved in the Z axis.
It has Slots for 3 screws which can be used to screw this base to Wood Tightly and other 3 holes for the 3 Rods with a notch to fix it tighly.

DrillStand_Base.stl

This will support and stop the three Rods to move in X-axis because of vibrations.

DrillSetup_Top.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

Rishi704

DrillMotorHolder.stl