Cooler Master Q300l PSU Bracket

Power Supply Caddy for the Cooler Master Q300L case. You will need M3 Screws/Nuts to mount onto the case. NOTE- THis does seem sturdy enough to hold the power supply at the top of the case but I set up the case to have the power supply at the bottom of the case.

Will need supports and I printed with a .6mm nozzle and in PLA (though PETG may be a better choice due to heat inside of the computer case)

Cooler Master Q300l PSU Caddy

Rii i4 Mini Keyboard Holder

Simple holder for the Rii I4 Mini Keyboard-- may fit others as well.

printed at a weird orientation with the bottom angle flat on the bed and with supports. 

used .6mm nozzle

Flashforge Creator Pro Bed Level

To use with a Flashforge Creator Pro in order to help manual level the bed

.2 layer height is fine



Asus U43J HDD Caddy

HDD Caddy for an Asus U43J. I looked on ebay to find a replacement and then thought about just making a slide that can just hold the HDD in place so it doesn't move around. I also used a bit of Neoprene adhesive on the door cover to help cushion it in more.

Fits quite tight.

I also printed with supports but you could probably get away with just bridging

.2 layer height is fine

Ender 3 Extruder Knob 

I wanted to reuse the brass fitting from the old knob that had cracked. Not sure of the longevity of this but I used my solder iron and tweezers to press it in.

I also printed without supports with the top of the handle facing down on the bed.

.2 layer height is fine

Pentax K1000 Camera Grip & Shells

I wanted to experiment with Ergonomics of a vintage camera. I used Double sided Acrylic Adhesive tape in order to affix the shells in place of the leather. Parts may need to be cleaned up depending how efficient your printer is.  

.2 layer height
Brim as the parts are sort of thin.
Supports fro some of the spots.

Pentax K1000 Shells

Minolta Weathermatic Power Switch

Cap for the switch on a Minolta Weathermatic D35. I have owned a few and they have broken. 

Fits quite tight.

.2 layer height is fine

Swing Top Glass Bottle Seal

The previous ring seal was getting old and falling apart. Here is a new one. It is a bit tight fitting so it really seals well.

I know that it may not be food safe but I am not using it for food.

Vintage Swingline Stapler Feet

I was missing feet for my old metal Swingline stapler. These will probably work for other models of the Swingline staplers.

Minolta Camera 16mm Film Cassette

Minolta 16mm Film Casette

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

RiClawson

Achievements

Seedling

Trailblazer

Up and Coming