Sometimes you have more than one enemy......so we must make sure we are drinking all of their tears.

This is only the juice box; the ghost is in a separate file. This is sized to fit PettyBoo. There are two boxes like before, one face down and one face up, with embedded text. They are both available for those who prefer to print one way or another.

If you have issues with the straw...slow down your acceleration and make sure you brim it.

Painted 3MF included. Verify your settings, including flush settings.

Printing recommendations: Straw needs a brim - the boxes and straw are printed in place Initial Layer and Infill Speed - 25 mm/s Line width has been changed to .3 to help with the details of the juice box. .20 layer height Print in place, no support required 3 walls - 10-15% infill Allow the plate to cool before removing the prints Slow Printer Acceleration for smoother prints - Half speed on the outer wall creates smoother prints.

Important Please Read: All Rebel Alicorn Designs are protected under Copyright Law. With your purchase, you are given the right to download and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by joining the “Legacy Merchant Tier or Merchant Tier” on Patreon, Thangs, or MMF.

More designs are coming soon! Check out my socials and give me a follow to keep up to date.

Warning: NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play, and broken 3D printed parts can create sharp edges. NOT recommended for children under 5