tracking pixel
RS

75mm_sealing_clip

by
Rean S
Follow
Follow
Remix Model
Like
75mm_sealing_clip 3d model
2D
3D
Makes
Be the first to upload a make
4 Likes59 DownloadsMay 10, 2021


This is a universal sealing clip for every kind of bag. It's designed to be very easy to print.

There are no overhangs in the hinge design and all angles are 45°. There is no need for support as well. I recommend a layer height of 0.24mm and at least 3 outer walls. Infill is not needed. There are two teeth with sharp points for a water tight sealing.

For every size there is an additional "closed" version. This version is not folded open and has a bit worse tolerances, so you can fit the clip on to your build plate. You will need to print this version with a raft to prevent elephant feet. If possible I recommend to use the non closed version.

The sizes are named by their actual usable length. If you can't find the size you like, just write it in the comments.

50mm ≈ 2in 100mm ≈ 4in 150mm ≈ 6in

If you have a special wish like a longer version or an engraved name, you can contact me at rean.schuette@ewetel.net as well.


4 Likes59 DownloadsMay 10, 2021




4 Likes59 DownloadsMay 10, 2021