Remix of Mini Annoying Cash Gift Box - Print in Place, Articulating, 15 bolts of frustration, Tree Ornament 

Thumb Tool.stl

Phone Wedge

RTK-PhoneWedge1.stl

Remix my Saber!

RTK-BrightSaber-BlankHandle.stl

Desk organizer 1

I challenged myself to make a desk organizer in less than 5 minutes and this is what I came up with.  Share a picture if you print it!

Encourage to play Sign

This sign was requested by a Thangs member!

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared.
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings -
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No

Remix of Mini Annoying Cash Gift Box

LS3DP ANNOYING BOX - MINI PIP.stl

Mini Annoying Cash Gift Box- REMIX from thelightspd

LS3DP ANNOYING BOX - MINI PIP.step

Blank Sign - Do your own design on it!

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared.
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings -
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No



$45.00 Display sign

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No


$50.00 Display sign

Be cautious of your bed placement, I had this over the purge line! (oopsie daisies)

I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No


$40.00 Display sign

RTK-Sign40dollar.stl

$35.00 Display sign

$30.00 Display sign

$25.00 Display sign

$20.00 Display sign

$15.00 display sign

$10.00 Display sign

$5.00 Display sign

Ask Santa for a 3D dragon!!

This display stand is perfect for upcoming craft fairs!  
I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No


RTK-CaliCatOrganizer.stl

I used the Cali Cat as inspiration for my desk-top organizer.  Printed as a gift for my daughters teacher.  I printed this at a high detail setting even though it probably didn't need it.  I used supports from build plate only.  

This is one of my free files from Printables.

Roblox gift box!

RTK-RobloxBox (1).stl

Bambu Lab waste chute

Rytek bambu Chute.stl

ROCK ON!  This tier gives you access to the files for 3d printing and I will customize up to two models a month for you with your logo or name!  (I will do my best to recreate your existing logo, if you have it as a .step file it helps)  You also have all commercial rights to resale any prints form the files.  


COMMERCIAL LICENSE - With your active support to Rytek through this Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires. 


ROCK SUPER STAR

Hi and thank you so much for checking out my designs!  I appreciate you more than you know.  I do my best to upload four or more models a month.  If you have any questions about them please don't hesitate to ask!  With this tier of membership you can sell any prints you print from the files.  the files are not to be shared or redistributed in any way.
 
COMMERCIAL LICENSE - With your active support to Rytek3D through thangs you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. - My digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs support. If you decide to no longer support my Thangs the commercial license will end at the time you access expires. I will be adding more files for you to print, helping you expand your inventory and options for your customers. I hope to add multiple files per month. Please let me know if there is something that I can do to improve any of my designs to help you sell them, or if you need a new design created. I will do my best to help you succeed using the files I create.

*ROCK STAR*

The Original 3D Printed Portable Storable Foldable Keychain Display Rack!

RTK-KeychainRack2-Arms.stl

Printed Tile Riser Display Stand

RTK-TileRiserLowerV2.stl

Scale Barn print kit

RTK-Barn-DoorCross.stl

Scale Buildings - Main Street

RTK-MS-AC-Rooftop.stl

I am Ryan and I love to do 3D designs in CAD and 3D print them!  I currently print with filament (FDM) and resin (SLA).  I am self taught for design work and love a challenge.  If you are my member then you will have access to all of my listed STL files.  If you would like me to make any changes to a design that you think would help you sell the prints, please let me know.  I do not sell on Etsy or any other social media platform.  We will not be in competition for sales on any of the major sites.  If you have questions, please ask me as I am more than happy to talk about 3D printing and design! THANK YOU for being a rock star and for your support, I greatly appreciate you helping keep my dream a reality!

Please make sure to review the posts that are available, no refunds will be given for memberships.

RYTEK3D