Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4354833.

<h3>Isofix cover for BMW E46 </h3>


I was missing one of the isofix covers so I modeled and printed this one. It's not a perfect copy since I added a bit of thickness in some parts to make it stronger.
You can see in one of the images the differences between the original and the 3d printed part. For this one the ABS filament is required since the PETG & PLA are not rigid enough.

Isofix cover for BMW E46 back seat

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4324082.

<h1>MT99 Multimeter battery mod</h1>

This is a back cover replacement for Mustool MT99 multimeter (the MT77 and MT99PRO models are similar).

I wasn't too happy about the battery life given by the two coin batteries so I've made a case for a battery mod. It houses a battery, power charger and voltage booster if needed.

The frame has space for any battery up to  47 mm X 47 mm x 8mm thickness, when using the covered version.
I've included a second model (edge), as a variant if you plan to use the original back cover. It has the advantage of about 13 mm thickness clearance for the battery.

You will need some supports for the Usb cable port, depending on the print position.

I've included some cylindrical geometry supports at the corners, those align with the back screws. It would be easier to drill the holes without hitting just the infill.

More details can be found on the [instructable link.](https://www.instructables.com/id/MT99-Multimeter-Battery-Mod/)



MT99 Multimeter battery mod


**_Alternative solution for BMW E46 Double Din AC Relocation Bezel._**

<p>After a  Double Din radio replacement you have to move the AC unit on the lower frame but the unit doesn't fit that well.
This is a simple solution that uses your original frame, the 3d printed part ("clamp") and a nut/bolt to fix everything in place. </p>

[Youtube video of the 3d clamp installation](https://www.youtube.com/watch?v=ETz905bmVaM)

The original frame is altered just a bit. On the left side it has a small lip that needs to be cut off, this helps with the AC panel alignment.(see image)
Before the final assembling you'll have to fully slide the clamp on the AC panel. Drill a hole through the original frame using the model hole as a template. Make sure the bolt and nut are locking with ease.

This solution doesn't require any new bezel or front lip.


Double Din AC Relocation Bezel for BMW E46, cheap solution

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4564617.

<h3>This is an alternative mount adapter for 3Dtouch or BLtouch.</h3>

Designed for the "Two Trees Bluer" 3d printer.

There are two models to facilitate printing (adapter and the shim). The shim is printed without supports and the adapter needs supports everywhere.

You will need the following settings in your printer settings - Leveling settings:

Enable auto levelling: Yes
Enable BLtouch: Yes
Probe connector: Zmin
Probe x axis offset: 41.5
Probe y axis offset: 0
Probe z axis offset: -3.2
Print Settings

Printer:
TwoTrees Bluer

Supports:
Yes

Infill:
20%

Filament_brand:
Generic

Filament_material:
PLA

Alternative mount adapter for BLTouch (3D touch)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

R4iNER

Achievements

Seedling

Isofix cover for BMW E46 back seat

MT99 Multimeter battery mod

Double Din AC Relocation Bezel for BMW E46, cheap solution

Alternative mount adapter for BLTouch (3D touch)