Come on let's be real. How many Benchys you have around? Yeah I figured. I am sure that they are just lying around...

Well this bundle of 3 different Benchy decoration that is about to change! Now you will be able to give the Benchys printed a better decorative look (specially your fist one in a new printer for example). This is an amazing print that will give a great touch on your 3d printable collection!

**In the files you will find:**
-The: Little wave decoration
-The Tsunami! decoration
-The: Oh S**t! KRAKEN! decoration
- EXTRA for THANGS DOWNLOADS: The tentacle on moving seas decoration. (this model is not featured as a picture and it is only to be found by the people that download the bundle. Little gift for you guys ;)

If you want to see this design in action Click the link ▶️:
https://www.instagram.com/p/C_s-E8yNsax/?hl=en

Drop a like💜, comment 💬 it really helps us creators to get more done :D

Buying this model does not grant access to sell it commercially, just for PERSONAL USE!

Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/

**Recommended settings:**

MODEL IS NOT SCALABLE, LEAVE IT AS IT IS FOR FITMENT ISSUES!

Layer height:
-0.2 mm is perfect

-NO SUPPORTS ARE NEEDED FOR ANY OF THE MODELS

-No extra adhesion to the bed is needed

-Infill: between 5 - 10% is more than enough. I printed mine with 5%

Benchy Boat Decoration Bundle

Benchy_Decoration_Style_3(Octopus).3mf

Are we dreaming?

Well.. now you have a way to check it with this awesome look alike inception totem. Similar style to the one used in the film!!

This one is designed to be a little Fidget to have on the desktop and make it spin endless times. It has an incorporated magnet (one at the base and another one at the totem) so it stays on the same spot while spinning. No one will know about the magnets, trust me ;)

It also works on any other surfaces if you do not want to use the base provided.

IMPORTANT: If you are not using a Bambulab Printer use the files with NO_PAUSES name. It seems that Cura slicer does not open the files with the pause setting.

Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/ :)

**Recommended settings:**

-For this print it is recommended the use of magnets for weight and stability for the rotation of the totem. This print uses two 10x3 mm magnets for the base and the totem. The STLs have the pauses incorporated so you can add the magnet mid print and let the print continue to hide them!

-NO SUPPORTS NEEDED FOR ANY PART!

-MODEL IS SCALABLE but keep in mind the gaps for the magnets!!

-Adhesion: Nothing is needed.

-Layer height: 0,2 mm is more than enough

-Infill: 10 % is more than enough

INCEPTION MAGNETIC ROTOR

1.-Rotor_handle_no_pauses.stl

<p dir="ltr"><span style="white-space: pre-wrap;">Halloween designs coming out soon ;)</span></p>

Get ready!

Unlock all of the Printplay3D models posted!

**Features:**
Discover a wide range of models suitable for beginners to advanced builders and printers. In this plan you will find multiple types of models, from switch dockers, articulated prints and many others!
Members will have 3 downloads per month on all the models I post, choose wisely!

**Benefits:**
Enjoy new models ensuring your creative pursuits stay fresh and exciting. 
Subscribe today and start building your creativity!

**Other information:**
- All my models are printed before upload to make sure the piece is as intended!
- Feel free to drop me a message on Instagram if something is needed (Instructions, custom parts, custom modifications etc..)
- **IMPORTANT: ALL of the models are for private use only**

Printplay Models!

Magnetic bees for kids designed as an activity. The idea is for the kid to match the color of the hive with the correct bee. They will love to play around with them, That I can ensure!

This activity is created for the kid to understand and match the colors without any explanation in a sense of exploring by themselves.

The idea of the magnets is for it to practice the pinching force that is needed to hold a pen/pencil when learning to write! There is a pincher added in the model but I have found that using a metallic one is way better for the little ones!

For this model you will need to use 20 magnets 10 x 4 mm (or smaller) that you can get from Amazon/Temu.

THIS ACTIVTY NEEDS TO BE SUPERVISED FOR SAFETY REASONS!

If you want to see this design in action Click the link ▶️: https://www.instagram.com/p/C-GAmn5N34f/?hl=en
Drop a like💜, comment 💬 it really helps us creators to get more done :D

**Buying this model does not grant access to sell it commercially, just for PERSONAL USE!**

Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/

**Recommended settings for printing:**

NO SUPPORTS NEEDED FOR ANY PART!

MODEL IS  NOT SCALABLE since it is ready to add magnets (10 x 4 mm) at the bottom of the bees and petals. In total you will need 20 magnets!

Adhesion: Nothing is needed.

Layer height: 0,2 mm is more than enough

Infill: 5 - 10 %. Consider more if younger kids will play with it as the item can receive some damage. 

Post -Process: Bees, flowers and the hive come in parts and will need further assembly. This is super easy and straight forward to do with a bit of fast glue. You may also need to trim some little pieces to make everything fit but it is a super easy process to do!

MAGNETIC BEES FOR KIDS

1.-Wings_eyes_joiner_Bees_(10_units.3mf

2.-Body_Bee_with_color.3mf

3.-Centrer_flower.stl

4.-Joiner_flower.stl

5.-Petal_flower.stl

3.-Hive_Complete_V2_(2cm_heith).stl

Hive_bot_Part1.stl

Pincher.stl

WELCOME TO HALLOWEEN DECORATION PART 1!

Since Halloween is suuper near I have prepared a series of models in order to have an amazing PINTING OCTOBER! 

To start this mini-series I present you my take on the super Famous Jack o'Lantern 

I have prepared 4 different models of faces for this one in order to have a bit or variety when decorating so it does not look repetitive. My personal fav is the one that has the eyes with different sizes by a lot, it simply looks amazing!

This print will use the little electric candles in order to create the light effect! As said, the set up is super easy and it is safe to use everywhere. I got mines from Temu but I am sure you can get them also in Amazon for super cheap!

You will also need 4 magnets 5x3mm per pumpkin in order to close them. This brings new opportunities because you can attach half of the pumpkin (with the candle inside) to ANYTHING MAGNETIC! Just let your creativity flowing, can't wait to see with people come up with!

MATERIAL LIST:
-Electric candle from Temu/Amazon
-4 5x3mm magnets per pumpkin

I used polymaker_3d filaments as always for that amazing final result! Sunrise orange and Army Dark Green just look amazing together don't you think?

Make sure to comment if you would like the same model but to use with real candles! I think it can be also a great addition for your home decor!

Do not hesitate to drop a follow because A LOT MORE MODELS ARE COMING SOON!!

Drop a like💜 really helps us creators to get more done :D

Buying this model does not grant access to sell it commercially, just for PERSONAL USE!

++Recommended Settings**

MODEL IS NOT SCALABLE, LEAVE IT AS IT IS FOR FITMENT ISSUES WITH THE MAGNETS!

Layer height:
-0.2 mm is perfect

-SUPPORTS ARE NEEDED FOR ALL OF THE MODELS. I used the basic Bambulab tree supports and has all turned out to be perfect.

-No extra adhesion to the bed is needed

-Infill: 10% in order to end up with a rigid piece. Less could break the piece when adding the magnets.

POST PRINT:

The magnets do not need to be glued in, just press them with the pointy end of the pliers that came with your printer!

MAGNETIC JACK O' LANTERN

1.-Hollow_Pumpkin_Style_1_Fake_Candle(Magnet).3mf

2.-Hollow_Pumpkin_Style_2_Fake_Candle(Magnet).3mf

3.-Hollow_Pumpkin_Style_3_Fake_Candle(Magnet).3mf

4.-Hollow_Pumpkin_Style_4_Fake_Candle(Magnet).3mf

5.-Hollow_Pumpkin_Style_4_Fake_Candle(Magnet).3mf

WELCOME TO HALLOWEEN DECORATION PART 3!

Since Halloween is SUPER near I have prepared a series of models in order to have an amazing PINTING OCTOBER!

To start continue with the series I have the honor to present the SCARY SKULL BONE MASK!

I have prepared this amazing high detailed mask to enhance the looks on your Halloween parties or when going door to door for the trick or treat!

The fitment is on top but still scalable in order to make it bigger or smaller! Also the mask is designed to be able to have small foam parts on the inside in order to adjust it to your face if you do not want to have it super close to the face when wearing it for a long time! It also has some holes on both sides in order to add a cord or some Velcro to fix it super easy to the head.

My personal recommendation is to wear it with a dark "Balaclava" underneath that covers your face in order to have the best look possible.

I used polymaker_3d filaments as always for that amazing final result! I used the Glow in the dark green for the bone part, Charcoal Black for the black parts and Gold for the Tusks to give a bit of detail.

With the model you will also have available as a SURPRISE:

-Longer horns that are my absolutely favorite
-Broken horns. In order to add a broken horn for the side that you prefer if you want to opt for that look.
-Broken Tusks in order to go with the broken horn look if you want

Do not hesitate to drop a follow because A LOT MORE MODELS ARE COMING SOON!!

If you want to see this design in action Click the link ▶️:

Drop a like💜, comment 💬 it really helps us creators to get more done :D

Buying this model does not grant access to sell it commercially, just for PERSONAL USE!

Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/

Let's see how this amazing mask does for the contest with ELEGOO :) #ThangsLovesELEGOO

**3D printing settings**
All the files are scaled for a "standard adult head" but in case you need to scale there is still space on the buildplate to make it a big bigger.

Layer height:
-0.2 mm is perfect. You could go for lower layers for extreme detail or use the Adaptative layers from bambulab to have best of both worlds

-SUPPORTS ARE NEEDED. They are already ready for all files but you can check and optimize as I used the Standard Tree support (that, in my opinion, work amazingly good)

-Adhesion is needed to print the teeth but, as the support, is already coded in the STLs

-Infill: between 5 - 10% is more than enough. I printed mine with 5%

SCARY SKULL BONE MASK

1.-Bone_Mask_V2.3mf

2.-Horns_Broken_Version.3mf

2.-Horns_Long_Version.3mf

2.-Horns_short_Version.3mf

3.-Normal_teeth_and_broken_tusks.3mf

WELCOME TO HALLOWEEN DECORATION PART 4!

🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃🎃

Today I bring another Coaster upgrade, the REST IN PRINT COASTER COLLECTION!

This print will ensure a great look for the coasters that you can use during your Halloween events happening soon!

The print contains 8 different designs that will give the extra touch. My personal favorites are the pumpkin ones, they are amazing😍

In terms of printing this is a super simple print that will need assembly. You just have to glue the tomb to the storage container.

This was printed using the following polymaker filaments:

-Lava red
-Sunrise Orange
-Charcoal Black
-Cotton White
-Fossil Grey

As always, amazing results with this filament. You can't go wrong when using them! If you have not tried them you have to, you will not be disappointed!🫶🏽

I hope you like it and if you do be sure to drop a like and a follow. More models coming out later on this week!✨
Do not hesitate to drop a follow because A LOT MORE MODELS ARE COMING SOON!!

If you want to see this design in action Click the link ▶️:

Drop a like💜, comment 💬 it really helps us creators to get more done :D

Buying this model does not grant access to sell it commercially, just for PERSONAL USE!

Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/

**RECOMMENDED SETTINGS**

Layer height:

-0.2 mm is perfect for this print.

-SUPPORTS ARE NOT NEEDED. 

-Adhesion is also not needed

-Infill: between 5 - 10% is more than enough. I printed mine with 5%

In case of stringing due to a lot of filament change you can use a blowtorch post print to eliminate the residue of plastic and enhance the final look!


REST IN PRINT HALLOWEEN COASTER COLLECTION

Base_painted.3mf

Coasters_1_2_3_6_7_painted.3mf

Coasters_4_5_8_painted.3mf

Tomb_painted.3mf

Hello! I am Printplay3D. I design and Print things, hope you like my models :)
Find me here: https://www.instagram.com/printplay.3d

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Printplay3d

Achievements

Seedling

Designer posts