**About:**
A model designed to increase the storage space in a Citroen C3 with the touchscreen.
It contains a keyholder (using a friction fit) and a phone holder with cable storage for Android Auto.
There are 2 versions of this model, [one with a 2 cm gap on the side of the phone mount (pictures)](https://thangs.com/designer/Power_Tricks/3d-model/Dashboard%20Mount%20(Gap)%20-%20Citroen%20C3%20(2023)%20-1102959) and an other without the gap (this one).
You'll also need 14 M2.5 x 6 screws which can be sourced from old laptop HDD-trays.
**
Installation:**
1) The mount is assembled and screwed together without the keyholder connected and slid behind the screen.
2) While sliding it in, make sure the connector slides in the base of the keyholder.
3) Afterwards, secure the keyholder with the M2.5 screws.

Dashboard Mount (No Gap) - Citroen C3 (2023) 

Connector_Phone.stl

**About:**
A model designed to increase the storage space in a Citroen C3 with the touchscreen.
It contains a keyholder (using a friction fit) and a phone holder with cable storage for Android Auto.
There are 2 versions of this model, one with a 2 cm gap on the side of the phone mount (pictures) and [an other without the gap](https://thangs.com/designer/Power_Tricks/3d-model/Dashboard%20Mount%20(No%20Gap)%20-%20Citroen%20C3%20(2023)%20-1102960)
You'll also need 14 M2.5 x 6 screws which can be sourced from old laptop HDD-trays.

**Installation:**
1) The mount is assembled and screwed together without the keyholder connected and slid behind the screen.
2) While sliding it in, make sure the connector slides in the base of the keyholder.
3) Afterwards, secure the keyholder with the M2.5 screws.

Dashboard Mount (Gap) - Citroen C3 (2023) 

House puzzle which can be used as decoration. You can give each piece to someone you find important to have them share in your "home".

The text in the picture is Dutch but the text on the model is English as seen in the renders.
Also updated the font to something which has less issues when printing.

Tolerance was provided but for the best result, set "Slicing Tolerance" to "Exclusive"

House Puzzle

Ground_Left.stl

Roof.stl

Pendant of a nautilus shell for earrings or a necklace

Nautilus Shell Pendant

Shell.stl

Cupholder trashcan that has been modelled for a Volkswagen Up! but it can be universally used.

!!!! There are 3 files for the lid, you can either pick the "Full-Lid" which contains the necessary items in one STL (arranged to fit an Ender 3 V2) or you can print the lid and ring separately.

Other things needed are:
- two 6mm x 2mm magnets
- M4 bolt and nut

The magnets are friction fit and should fit fine when pressed into the corresponding sockets (a bench vise might come in handy).
For the M4 bolt it might be necessary to use a drill to make the hole a bit bigger but normally it should also fit.

Cupholder Trashcan

Can_Body.stl

Wall mount for a sheet with a thickness of 3mm (i.e. plexiglass or acrylic).
No risk of cracking it when drilling holes as you can use the mount instead.

There are 2 mounts, one for the sides of the sheet (embossed "S") and one for the bottom (embossed "B").
Both are different as the bottom mounts has a little ridge to keep the sheet from moving while the side mounts are smooth the allow easy removal for cleaning, etc.

Wall Mounts Plexiglass/Acrylic

BottomHolder.stl

A small earring of a crab holding the loop for the earring hooks

Crab Earring

Can_Full-Lid.stl

Can_Lid.stl

Can_Ring.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Power_Tricks

Achievements

Seedling

Pinned models

Crab Earring

Cupholder Trashcan

Nautilus Shell Pendant

Dashboard Mount (No Gap) - Citroen C3 (2023)

Dashboard Mount (Gap) - Citroen C3 (2023)

House Puzzle

Nautilus Shell Pendant

Cupholder Trashcan

Wall Mounts Plexiglass/Acrylic

Crab Earring