The MagSafe Phone stand is the quintessential accessory to any Desk Rail system. This mount provides a rock-solid, magnetic interface for your iPhone, perfectly positioning your device for FaceTime, notifications, or as a secondary display while you work.

This mount introduces two key engineering innovations for the Platforma ecosystem. First, the Under-Rail Mounting System allows the MagSafe puck to sit flush with the rail while the cable is routed underneath, completely hiding the wire from view. Second, to account for different material properties and printer tolerances, we have included both Normal and Stiff clip profiles—ensuring a perfect, secure fit regardless of your choice of filament.

Key Features

• Stealth Cable Routing: Designed to mount from underneath the 2020 rails, keeping your cables completely hidden from view.
• Dual-Tension Profiles: Includes "Normal" and "Stiff" clip designs to ensure a secure fit for everything from standard PLA to high-performance PETG.
• Precision MagSafe Fit: Calibrated for a perfect friction-fit with the official Gen 2 Apple MagSafe charger.

Printing Tips

• Orientation: Print the phone stand mount flat in the same orientation it will be installed.
• Supports: This model is designed to print without supports, but can be utilized to prevent sagging.
• Stiffness: During testing I have found that the normal version prints well on Core-XY printers whereas the stiff version is better for bed-slingers.

Recommended Print Settings

• Layer Height: 0.2mm (smaller layer heights are prone to snapping)
• Infill: 15%–20% Gyroid
• Wall Count: 2–3 walls for optimal rigidity
• Top/Bottom Layers: 3 layers
• Supports: Recommended

Materials Used

• Filament: https://amzn.to/47IfTTE
• MagSafe Charger: https://amzn.to/4qX32FD

As an amazon affiliate I may earn a small commission on qualifying purchases at no cost to you. This is a free way to support my work and I greatly appreciate it, thank you!