OMEGA is an articulated Robot that is printed in a few pieces to assemble, its joints allow it to pose in many ways.

It includes two weapons that can be used to replace his hands.

RECOMMENDATIONS:

• Use PLA+ filaments or strong filaments.
• Use supports only for the joints.
• Do not use supports on: hands, feet and weapons.

Available in STL and 3MF painted formats!

I have mixed PLA+ and silk PLA filaments for the 100% scale printed Omega droid, the PLA+ I have used is the black color and I have used it on the joints to give it more firmness.

You can apply a coat of nail polish to the joints if they wear out with use or if you print larger scale, this helps the joints to be firmer.

I have used PLA+ for 200% scale printing and it has worked very well.

For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Membership to get a welcome pack and exclusive benefits

https://thangs.com/designer/PipeCox

3D PRINTING PARAMETERS Material: PLA+ Nozzle temperature: 210°. Thermal bed temperature: 60°. Nozzle diameter 0.4 mm. Layer: 0.1 mm Filling 15 %. Support: Yes, in