This scuba tank holder prevents your tanks from rattling and rolling when driving to the dive site! For those in a hurry or just driving down bumpy roads, TankLink also has holes for bungee cords to keep your tanks secured even during the bumpiest rides.

I've connected the tank holders with _____ because they are pretty and convenient, but you can use any bolts on hand. 

Fits classic long skinny tanks. Let me know if you want a wider version for wider tanks!!

Print out of ABS if possible (or PETG if not) because PLA is too brittle and deforms under hot temperatures experienced inside a car during the summer (yes i tested it).

TankLink: Your Modular Scuba diving tank holders

TankLink v15.step

**Description**
Make your own scroll saw sanding strips! I found them to be too pricy for how prone they are to breaking. Read the printing and assembly instructions bellow to minimize troubleshooting and get to sanding!

**Printing instructions**
       - Material: I printed these out of ABS, In my tests I've found that the sand paper itself is much weaker than the plastic, so you can probably get away with using PLA.
       - Print settings: I increased the **wall loops** to 10 to cover the whole interior, essentially doing 100% infill, but stronger. Enable **regular support** and use a **brim** if needed.
       - Print orientation: I i tried printing it in both directions (Link set vertically and Link laid flat). I think both options are similarly strong (I will edit this if I learn anything during use), so set it in whatever direction you think your printer will best handle.
       - Hotend: I used a stainless steel 0.2mm nozzle, but you can use 0.4

**Assembly instructions**
       - Cut the sandpaper into ~6.5cm strips
       - Cut the strips to length (for my 16 inch scroll saw, I cut the strips to 3.75" in length (sorry for metric and imperial (sorry not sorry)))
       - Apply superglue to the edge of the sandpaper strip and insert it into the printed hook. wait for it to set or spray quickdry solution.
        - Repeat for other side

        - Ball out on da sander

Scroll Saw sandpaper hook

Sandpaper Hook Body.step

I use Inventor, Fusion 360 and Onshape primarily, and i dabble with AutoCAD and Blender

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Paul's Station

Achievements

Seedling

Pinned models

Scroll Saw sandpaper hook

TankLink: Your Modular Scuba diving tank holders

TankLink: Your Modular Scuba diving tank holders

Scroll Saw sandpaper hook