Projectvideo:
https://www.youtube.com/watch?v=6RgBXBwwXBg

1:64 Print-in-place kit card.
Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version

The Jeep Kit Card:
https://than.gs/m/1051403
The Trailer:
https://than.gs/m/1051404
The Gun:
https://than.gs/m/1064529

Subscribe or follow me on:
Instagram: www.instagram.com/agepbiz
YouTube: www.youtube.com/user/agepbiz
Twitter: www.twitter.com/agepbiz

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

Printsettings:
No support
No raft
0,16mm layer height

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Jeep Kit Card

jeep_kit_card.stl

it is a tree fidget and it really fun to play with and test how good your 3d printer really is. But it is an easy print.


Fidget_spiral_cone.stl

[Instructions](https://prinnit.com/ForgeCore/design/36A85fcVW7OKEKttHluFQ8n4CZH?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/36A85fcVW7OKEKttHluFQ8n4CZH?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/36A85fcVW7OKEKttHluFQ8n4CZH?section=filaments&highlight=filaments)

**Desktop Cornhole!** - _Intermediate_ 

Another addition to the desktop games collection. Just like Desktop Hockey, this game is actually super addicting to play.

Print two sets of boards and play across the length of a table. 

**Rules** 
The rules are the same as normal cornhole but with a twist. You take turns throwing your 4 bags at the opposite board. But you can use the built in catapult to launch your bags instead of throwing them!

Bag on board = 1 point
Bag in hole = 3 points
Opposing team's points cancel each other out each round
First to 21 wins, must win by 2

**The Design**
This design features articulating beanbags inspired by 3d printed chainmail. I designed the bags to bend, and flop just like real cornhole. The physics worked out pretty great on this! The bags slide, flop, spin, and stick just like real cornhole thanks to the articulating design that absorbs energy just like the beans in a real beanbag.

The board has a built-in catapult so you can launch your bags in addition to throwing them. Flip up the Sight, pull back the launcher, and send your bags flying!



Desktop Cornhole - Catapult and articulating bean bags

Catapault Cornhole 3mf.3mf

**Try the free new [Swing Ring](https://than.gs/m/997568) advanced motion ring with this Ringchaku!**

**Check out the premium editions available for purchase or free for [subscribers](https://than.gs/u/803093?plans=true):**
- **[Special Thanksgiving Edition](https://than.gs/m/964381?affiliateCode=Jaatinen3D)**
- **[Mace Edition](https://than.gs/m/969867?affiliateCode=Jaatinen3D)**
- **[Blade Edition](https://than.gs/m/973197?affiliateCode=Jaatinen3D)**
- **[Christmas Edition](https://than.gs/m/975683?affiliateCode=Jaatinen3D)**
- **[Kusarigama Edition](https://than.gs/m/99223?affiliateCode=Jaatinen3D7)**
- **[Valentine's Day Edition](https://than.gs/m/996100?affiliateCode=Jaatinen3D)**
- **[Easter Edition](https://than.gs/m/1036839?affiliateCode=Jaatinen3D)** **NEW!**

---

***Update 2023-26-12**: I've added three smaller versions of the ring: 22mm, 20mm and 18mm. Let me know if you need even smaller!*

---

See it in action here: https://youtube.com/shorts/A2oVwtr6K3I

Addon for my [Christmas Chain](https://than.gs/m/963853). Fun fidget toy you can spin around your fingers making tricks and impressing your imaginary friend! Print a Christmas Chain of appropriate length (I'm using length 14, it feels nice) and attach the **Ring** and **End** to the chain. Ready to spin!

Prints nicely without supports!

---

Don't forget to check out my Instagram and YouTube channel for more interesting projects!
https://www.instagram.com/jaatinen3d
https://www.youtube.com/@Jaatinen3D

Ringchaku Spinning Fidget Toy

Christmas Chain V1.2 - Ringchaku Ring.stl

Christmas Chain V1.2 - Ringchaku Ring 18mm.stl

Christmas Chain V1.2 - Ringchaku Ring 20mm.stl

Christmas Chain V1.2 - Ringchaku Ring 22mm.stl

Festive premium skin for the **[Ringchaku Spinning Fidget Toy](https://than.gs/m/964057)**! Spin a Christmas tree around your fingers!

**Try the free new [Swing Ring](https://than.gs/m/997568) advanced motion ring with this Ringchaku!**

Includes two versions; one with one attachment slot at the top of the tree (**A**), and an advanced version (**B**) with double attachment points! The advanced version can be spun from the trunk and fitted with a special tree topper clip (see pictures)! I recommend printing version **B** so you can change the orientation as you please.

**Printing tips**
Print the tree in the default orientation, which is upside down, so there's no need for supports. I recommend a wide brim because the bed adhesion surface area isn't much!

Add a filament change at the start of the trunk to make it pop!

Ringchaku Spinning Fidget Toy - Christmas Edition

Ringchaku Christmas Tree B.stl

[Ringchaku](https://than.gs/m/964057) with a mace head instead of nunchuk. Macechaku? Ringmace?

Thanks to [BigBoomPrints](https://thangs.com/designer/BigBoomPrints) for the idea!

**Try the free new [Swing Ring](https://than.gs/m/997568) advanced motion ring with this Ringchaku!**

See it action here: https://youtube.com/shorts/7Vohu-ataNE

Ringchaku Spinning Fidget Toy - Mace Edition

Ringchaku Mace.stl

[Ringchaku](https://than.gs/m/964057) special skin with kusarigama, a sickle like weapon. **Ringchakusarigama!**

**Try the free new [Swing Ring](https://than.gs/m/997568) advanced motion ring with this Ringchaku!**

I have included both the full model — if you want to just print it as is, with lots of supports — and the separated **Handle** and **Blade** you can print more easily and then glue together.

You can add some tactical filament changes to the different parts of the handle to make it pop, like the one I printed in the pictures. All the different parts can be separated in the STL if it helps with painting for your fancy MMUs which I don't have (yet)...

Ringchaku Spinning Fidget Toy - Kusarigama Edition

Ringchakusarigama V1.0.stl

This is a collaborative project by [ForgeCore](https://thangs.com/designer/ForgeCore) and me.

**A unique chess set for all nature lovers.**
This set consists of a foldable board that rolls up into a portable log and figures that are all based on different mushroom species.

**Updates**
1. An acorn playing figure to play checkers
2. A print-in-place version
3.  Now with the possibilty to create magentic chess pieces

Log: Pinus Sylvestris
Pawn: Boletus edulis
Rooks: Lentinula edodes
Knight: Morchella esculenta
Bishop: Pleurotus eryngii
Queen: Amanita muscaria
King: Cantharellus cibarius

A PDF with print and assebly instructions is included!

**Print settings**
Material: PLA
Print direction: stls are rotated correctly
Nozzle size: 0,4 mm
Line width: 0,4 mm


Forest Chess set

Board Pieces (Assembly Board Only).stl

Tiles (Assembly Board Only).stl

1 - Easy Print 3mf - Chess Board (Assembled).3mf

1 - Easy Print 3mf - Chess Board (Print in Place).3mf

Board (Print in Place).stl

Checkers Pieces.stl

Chess Pieces.stl

End Caps.stl

[Instructions](https://prinnit.com/ForgeCore/design/368VNwfy4uM9UKwBS0uIatrY1nf?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/368VNwfy4uM9UKwBS0uIatrY1nf?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/368VNwfy4uM9UKwBS0uIatrY1nf?section=filaments&highlight=filaments)

**Desktop Disk Golf** - _Advanced_

Desktop Disc Golf! Adding this one to the collection of desktop games. This one is Super high skill, and great for testing your trick-shot abilities.

This design requires no additional components to be ordered. You can play with the included disc, or use bottle caps to make it a drinking game. 

Included is a Travel container, since these collapse down nicely.

**Launcher Update**
The launcher has been made better! It now has finger holes and uses a rubberband for extra strength. There is a print-in-place launching mechanism. 


**For Advanced 3D Printer Users** 
Make sure you are using a super clean build plate when printing the chains. This model requires really good build plate adhesion, the chains are prone to failure unless you have a very clean build plate. 

To avoid binding of the center pole, make sure to enable "random" for the z-seam settings.

If you are an experienced 3D Printer, you should be able to print this just fine. but If you're a beginner you may want to start by printing out some easier models first like [this one](https://than.gs/m/1262594)




Orionnoir

Achievements

Voyager

Interactive Toys