A custom Magic: The Gathering Commander deck box. The box opens up from the top and has a drawer for all +1/+1 tokens. The top of the box also acts as a stand for the bottom section containing the deck itself for easy card pulling. The dimensions should be in mm and as follows: CAP: X: 73.660 Y: 78.740 Z: 66.040 BOTTOM: X: 73.660 Y: 78.740 Z: 90.690 DRAWER: X: 76.268 Y: 18.790 Z: 67.370 I highly recommend printing the Cap upside down with the roof of the cap on the print print bed, that produced the best results for me. I also recommend printing the drawer on its side and the bottom portion normally with the floor of it on the print bed. Please let me know if you run into any issues!