I remixed https://www.thingiverse.com/thing:3144724 and https://www.thingiverse.com/thing:5222431 to make a spool holder with rolling bearings for the Ender 2 Pro.

***Used 608 Bearings***
Using CHEP's Fast Printing Profile
Material: PLA
Nozzle Temp: 210°C
Bed Temp: 60°C
Speed: 50mm/s
Supports: Yes

I

Ender 2 Pro Spool Holder

Ender2ProSpoolHolder_with_pins.stl

I modeled and printed some shitty guitar picks earlier and needed an appropriate case for them. I present "The Shitty Pick Case".
Print Settings
Material: Brown PLA+
Nozzle Temp: 215°C
Bed Temp: 60°C
Speed: 60mm/s
Supports: Top-Yes, Bottom-No
I printed these using Fuzzy Skin on the outside only. For the Bottom, I used a support blocker in Cura and modified the setting so that the Fuzzy Skin setting stopped where the Top piece and Bottom piece meet.


Shitty Pick Case

ShittyPickCaseBottom.stl

Another Guitar Pick I designed when I got some brown PLA+. 

Material: PLA +
Nozzle Temp: 215°C
Bed Temp: 60°C
Speed: 50mm/s
Supports: None
***NOTE: Let the be cool completely before removing the pick to prevent warping. ***

ShitPick.stl

I was inspired by a model I got from https://www.thingiverse.com/thing:2320184. While I liked the concept, I didt like the model as much so I made my own and shared the file on my Github (https://github.com/OddHatter/3DPrintedCustomDickPicks) and sent some to my dad. After printing my first model I saw that the picks were slightly larger than a standard pick so I remodeled them and sent some to my friends. 

Material: PLA+
Nozzle Temp: 215°C
Bed Temp: 60°C
Speed: 50mm/s
Supports: None

**Let the bed cool before removing the picks as they will warp if you remove them when they are 'fresh'. 



CustomDickPick.stl

Model of a drink coaster with Yoda reminding you to use it. I got a spool of gree PLA+ so I made something to print with it really fast. 
Material: Green PLA+
Supports: Yes
Infill: 20%
Nozzle Temp: 215°C
Bed Temp: 60°C 

Yoda Coaster

Model of a drink coaster with Yoda reminding you to use it. I got a spool of gree PLA+ so I made something to print with it really fast. 

Summary
I modeled this in Blender 3D using the head from the .stl file I downloaded from https://thangs.com/designer/pressprint/3d-model/ROCKTOPUS-38348.

This will not print properly in vase mode yet.

Print Settings
Printer:
Ender 2 Pro


Rafts:
No

Supports:
Yes

Resolution:
0.2mm

Infill:
10%

Filament brand:
Sunlu


Filament color:
Wood


Filament material:
PLA


Notes:
Nozzle Temp: 205°C
Bed Temp: 60°C
Speed: 60mm/s

TheRockFaceVase.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like