Recommended Print Settings

• Layer Height: 0.20 mm
• Initial Layer Height: 0.20 mm

Infill Settings

• Sparse Infill Density: 15%
• Sparse Infill Pattern: Gyroid
• Fill Multiline: 1
• Length of Sparse Infill Anchor: 400%
• Maximum Length of Sparse Infill Anchor: 20 mm
• Filter Out Tiny Gaps: 0 mm

Printer Notes

• Tested with a 0.4 mm nozzle
• Suitable for PLA, PLA+, and PETG
• No supports required
• Use a brim if additional bed adhesion is needed
• Increase infill to 20–25% if extra weight or durability is desired

Recommended Material

• PLA or PLA+ for decorative use
• PETG for higher temperature environments or lamp applications using LED light sources only