**Want to upgrade your FLSun Super Racer to support a E3D Revo or V6 compatible hot end? Look no further!**

The Imahara hotend assembly has you covered. Print each of these parts in PETG for optimal performance.

**3/24 Update v1.1**
I have added the file "Effector2" for anyone using Revo setups. This has added clearances for the wires.

Assembly Instructions Coming Soon

For assembly, you will need;
- 2x - M3x9 Bolts
- 4x - M3x25 Bolts
- 6x - M3x15 Bolts
- 8x - M2x10 Bolts
- 6x - M3x8 Ball Joints
- 6x - M3x10 Set Screws
- 12x M3 Nuts
- 3x Fans (Included with your FLSun SR)
- Auto Leveler Mount (Included with your FLSun SR)
- E3D Revo or V6 Compatible Heatsink of your choice.

Please note, you can substitute the Ball Joints and the Set Screws with the ones from the original Effector plate, however, these have a high risk becoming stripped, so we don't recommend this unless you're willing to sacrifice your effector plate. The fans and auto leveling mount can be removed with ease, and are required for this assembly.

If you'd like to purchase a kit to avoid destroying your original hotend, please see [Here](https://nomadsgalaxy.com/products/imahara-revo-super-racer-assembly-kit). A portion of proceeds will go to supporting Ukraine.

Follow us on [Twitter](http://twitter.nomadsgalaxy.com) or join our [Discord](http://discord.nomadsgalaxy.com) for updates on this project.

Core Parts Derived From [jipvanleeuwenstein](https://www.thingiverse.com/jipvanleeuwenstein)'s [Flsun Super Racer SR E3d Volcano HotEnd 1.75mm Bowden](https://www.thingiverse.com/thing:4927336)

FLSun SR Revo Assembly - "Imahara" © 2022 by [Nomads Galaxy](https://nomadsgalaxy.com) is licensed under [CC BY-NC-SA 4.0](http://creativecommons.org/licenses/by-nc-sa/4.0/?ref=chooser-v1)

Imahara - E3D Revo|V6 Assembly for FLSun Super Racer

Assembly Core

Heatsink Clamp

Revo Six Placeholder (DO NOT PRINT)

Main Fan Placeholder (DO NOT PRINT)

Side Fan Mount 1

Side Fan Mount 2

Side Fan Duct 1

Side Fan Duct 2

Side Fan Placeholder 1 (DO NOT PRINT)

Side Fan Placeholder 2 (DO NOT PRINT)

A follow up to my last version of "Little Dicktator" - this version has him sitting atop a pile of shit!

Original File Here;
https://social.thangs.com/m/53115

Little Dicktator - Pootin's Full of Shit!

A follow up to my last version of "Little Dicktator" - this version has him sitting atop a pile of shit!

Little Dicktator - Pootin's Fill of Shit!

Featured in: https://www.youtube.com/watch?v=4xxKyLcKh54

Added Pootin Edition:
https://social.thangs.com/m/54103

All Dicktators are Knobheads.

Print with Lightning Infill, 25% - 2 walls, for best smash-ability.

Use sledgehammer for best results.

#StandWithUkraine

I understand this joke about Putin being a "Dickhead" relies on the English pun, and may not be understood outside of English speaking languages. If someone could translate this into Ukrainian, that would be appreciated ♥️

Little Dicktator! Putin Edition

Dicktator Putin

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5247839.

This is the Print Head Assembly for the Infi-20 printer, model provided by Sainsmart.

Please use this as a reference.

Sainsmart Infi-20 Print Head Assembly

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

NomadsGalaxy

Imahara - E3D Revo|V6 Assembly for FLSun Super Racer

Little Dicktator - Pootin's Full of Shit!

Little Dicktator! Putin Edition

Sainsmart Infi-20 Print Head Assembly