A pass-through during the early to mid-game that converts to a double dispenser in the late game. This uses the same base as the Wave and the Tsunami tiles so you can swap the flippers. Watch the video to see it in action.

Rules Card Text On Overdrive: If the starred hole is empty, place a ball in it. When any tile is played and the board becomes/is full If there's still any confusion, the counterweight ball does not get removed when the board kicks out of overdrive.

Hardware / Printing

• One M3x12 screw (or longer)
• Two M3 washers
• PLA, 2 walls, 10% infill, no supports

Assembly

1. Insert an M3x12 screw into the flipper, stack 2 washers on the screw, then install the flipper. Crank it down until it stops rotating freely.
2. Slowly back out the main screw 1/8th of a turn. Repeat until the flipper freely rotates.

This tile is part of my Counterweight Dispensers Pack. Check the others out.

• 180zu https://than.gs/m/1327652
• AltWave https://than.gs/m/1031259
• Anchor https://than.gs/m/1288074
• K-zu https://than.gs/m/1288115
• Overdrive Wave https://than.gs/m/1031248
• Wave https://than.gs/m/1031247
• Sailboat https://than.gs/m/1288126
• Tsunami https://than.gs/m/1031250
• Twozu https://than.gs/m/975596