If you are a fan of the old LA Rams logo and chain links then this should curb your appetite.
Get the free color .3MF file version with chain links here: https://makerworld.com/en/models/650545
All the settings are set in the .3mf file, you will find the emblem which you can adjust the size. Make sure to NOT select the chainlink RING when resizing the logo to avoid mis-sizing it. After sizing logo, just put the ring back up top into place.
You will find 2 sets of chain-links, 1 set is three colored blue - yellow - blue, you can change this to whatever you want after you slice this plate, ie: white - yellow - blue. You will see the color changes in slice on the right side, this is also where you change it.
The second set is 3 plates of solid colors blue, white, yellow, to allow alternating color links and a quicker print.
You can build as many links as you wish, I normally build my chains 30 links + 1 link to attach to logo + 1 connector. so 31 regular links and 1 connector link. Check images to see how its all connected to the logo.
You'll see there is more links total than needed to build with, this is just in-case some are lost mid print. Just pop open the Bambu app click 'skip' and skip any chain links you may lose to avoid starting over.
Make sure your plates clean and will hold, I wouldn't recommend brim of any kind.
I do use the prime tower on the logo print, but I turn it off for the three color chain links. You may get away with turning it off on the logo too. YMMV
Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag