English:
Wall/sim rig in aluminum profiles support.
It is universal for all Fanatec racing wheels with Quick Relase V1 (QR1)
With this support you will no longer have to store your steering wheels under the bed or in a wardrobe!
Perfect for displaying or neatly storing Fanatec steering wheels.

3 models available: with 2 horizontal holes, with 2 vertical holes, or with 3 holes.

all models can fit an optional steel ball which adds stability to the steering wheel (especially on the old Fanatec P1 V1).

Link [Steel ball D8mm](https://it.aliexpress.com/item/1005006326053912.html?spm=a2g0o.cart.0.0.407118fcKfe53N&mp=1&gatewayAdapt=glo2ita)

Link [Spring Lenght: 5mm - Wire diameter: 0,7mm - Outer diameter: 6mm](https://it.aliexpress.com/item/1005003784805422.html?spm=a2g0o.cart.0.0.430b18fcdtXFas&mp=1&gatewayAdapt=glo2ita)

--------------------------------------------------------------
Italiano:
Supporto a parete o per postazione di guida in profilati di alluminio.
è universale per tutti i volanti Fanatec con Quick Relase V1 (QR1)
Con questo supporto non dovrai più riporre i tuoi volanti sotto al letto o dentro un armadio!
Perfetto per esporre o riporre in modo ordinato i volanti Fanatec.

3 modelli disponibili: con 2 fori orizzontali, con 2 fori verticali, oppure con 3 fori.

tutti i modelli possono montare una sfera opzionale che va ad aggiungere stabilità al volante (soprattutto sulle vecchie corone Fanatec P1 V1).

Link [Sfera D8mm](https://it.aliexpress.com/item/1005006326053912.html?spm=a2g0o.cart.0.0.407118fcKfe53N&mp=1&gatewayAdapt=glo2ita)

Link [Molla Lunghezza: 5mm - Diametro filo: 0,7mm - Diametro esterno: 6mm](https://it.aliexpress.com/item/1005003784805422.html?spm=a2g0o.cart.0.0.430b18fcdtXFas&mp=1&gatewayAdapt=glo2ita)


Fanatec Wall mount - RIG mount QR1

Fanatec QR1 Wall mount (vertical).stl

**STOP z wobble!**

Decoupling system using the "WobbleX" ([By Hevort/MirageC](https://github.com/MirageC79/Interfaces-for-WobbleX-integration)) for Flying Bear Ghost 5.

The entire project serves to create a coupling with play of the T8 acme screw so that it can move eccentrically without affecting the print.

Eliminates z wobble due to crooked acme screw.

the file "Optional_Spessoremotore+4mm.stl" is optional, and is used to add print volume in height. if you want to install it, it must necessarily be mounted together with the F5-10M axial bearing.

Purchase list necessary for the correct assembly of the mod:
[1x] [WobbleX (Model:WS8)](https://it.aliexpress.com/item/1005004227149356.html?spm=a2g0o.order_list.order_list_main.50.4d253696Wu0WKT&gatewayAdapt=glo2ita)
[4x] [Pin 3mm L15 pin](https://it.aliexpress.com/item/33011975019.html?spm=a2g0o.order_list.order_list_main.42.4d253696Wu0WKT&gatewayAdapt=glo2ita)
[1x] [Flexible coupling D26L26 (Model 5x8)](https://it.aliexpress.com/item/4000786825178.html?spm=a2g0o.order_list.order_list_main.44.4d253696Wu0WKT&gatewayAdapt=glo2ita)
[2x] [Nut M3 DIN 439 (Low profile)](https://it.aliexpress.com/item/1005003126143003.html?spm=a2g0o.cart.0.0.785918fc6RMkJi&mp=1&gatewayAdapt=glo2ita)
[1x] [Axial Bearing F5-10M (Optional)](https://it.aliexpress.com/item/1005001645041391.html?spm=a2g0o.order_list.order_list_main.404.4d253696Wu0WKT&gatewayAdapt=glo2ita)
[1x] [Radial bearing GEBJ8C](https://it.aliexpress.com/item/1005001801173096.html?spm=a2g0o.order_list.order_list_main.74.4d253696Wu0WKT&gatewayAdapt=glo2ita)
[2x] [screw M3x6 DIN7991](https://it.aliexpress.com/item/1005003116728453.html?spm=a2g0o.order_list.order_list_main.10.4d253696Wu0WKT&gatewayAdapt=glo2ita)
[2x] [screw M3x10 DIN7991](https://it.aliexpress.com/item/1005003116728453.html?spm=a2g0o.order_list.order_list_main.10.4d253696Wu0WKT&gatewayAdapt=glo2ita)
[2x] [screw M3x10 DIN7380 (Optional, for thickness +4mm)](https://it.aliexpress.com/item/1005003116299250.html?spm=a2g0o.cart.0.0.202b18fcS3NtEW&mp=1&gatewayAdapt=glo2ita)

Tools needed:

2mm Allen key [included with Ghost 5 printer]

**ATTENTION:**

the M3x10 DIN7991 screws are installed close to magnets, so they **MUST NOT BE MAGNETIC.**

STOP z wobble per Flying Bear Ghost 5 by WobbleX

Adattatore rialzato.stl

Drag chain installation system for Flying Bear Ghost 5.

The entire project can be installed on the 3D printer either with the original Bowden configuration, or with the direct drive Orbiter or direct drive Sherpa mini modification.

A minimum of 19 links are needed for the drag chain.

Purchase list necessary for the correct assembly of the mod:
[1x] [Drag chain 10x11 R18](https://it.aliexpress.com/item/1005002038905501.html?spm=a2g0o.order_list.order_list_main.477.66f33696Tfj6oQ&gatewayAdapt=glo2ita) - [Alternative link](https://it.aliexpress.com/item/1005001795469984.html?spm=a2g0o.cart.0.0.5fbb18fcyhcPqX&mp=1&gatewayAdapt=glo2ita)
[5x] [DIN7991 M3x10 screws](https://it.aliexpress.com/item/1005003116728453.html?spm=a2g0o.order_detail.order_detail_item.4.6a0a582feKZdQn&gatewayAdapt=glo2ita)
[5x] [DIN7380 M3x12 screws](https://it.aliexpress.com/item/1005003116299250.html?spm=a2g0o.cart.0.0.347818fcdsSXQv&mp=1&gatewayAdapt=glo2ita)
[4x] [DIN7380 M3x8 screws](https://it.aliexpress.com/item/1005003116299250.html?spm=a2g0o.cart.0.0.347818fcdsSXQv&mp=1&gatewayAdapt=glo2ita)
[9x] [Dadi DIN934 M3 Nuts](https://it.aliexpress.com/item/1005004510637660.html?spm=a2g0o.cart.0.0.347818fcdsSXQv&mp=1&gatewayAdapt=glo2ita)

Tools needed:
allen wrench hex 2.0mm [included with Ghost 5 printer]

Contact me for any doubts and/or problems during installation
Constructive criticism are welcome
--------------------------------------


Drag Chain for Flying Bear Ghost 5 Catena Portacavi

Attacco Catena Testa.3mf

English:

[Installation video](https://www.youtube.com/watch?v=Ho6QR3lrYzo)
[Download Sherpa Mini Assembly Instructions](https://raw.githubusercontent.com/Annex-Engineering/Sherpa_Mini-Extruder/e6d5ad7d67bb620d3d67880eb1422cfb7af78d60/Build_Instructions/Sherpa_Mini_Build_Instructions_R2_A0.1.pdf)
[Instructions for pause at height on Cura Slicer ENG](https://www.youtube.com/watch?v=7D90Xvi7PYE)
[Instructions for pause at height on Prusa Slicer ENG](https://www.youtube.com/watch?v=r-nIErCvu_M)

Direct Drive modification system for Flying Bear Ghost 5 with extruder [Sherpa Mini](https://github.com/Annex-Engineering/Sherpa_Mini-Extruder)
The Sherpa mini is a powerful Direct Drive extruder with a compact design, developed by Anlin and the Annex Engineering team.
it can be printed at home, or purchased from various manufacturers such as [TriangleLab](https://trianglelab.net/) or [Mellow](https://mellow.it.aliexpress.com/store/1531088)

Three designs to adapt to every need:
File1 fixing via M3 nuts
File2 fastening with premium threaded inserts [Ruthex](https://www.ruthex.de/)
File3 fastening with generic threaded inserts (China)

**ATTENTION:**
if you choose to print the file with M3 dice, it is strictly necessary to print at **layer height 0.2**, and insert **pause at layer 91.**
I tested the printer only with parts printed at home, and it turned out that for the X limit switch to work correctly, you need to print the [a]_housing_front_x1_rev15_thin file I provided, because it was lowered by 0.5mm. If you take the official file, you risk hitting the screw before the printer reaches the end stop. for this reason I cannot guarantee correct functioning if the Sherpa Mini is purchased already assembled from various suppliers. In this case, I recommend satisfying the M3x8 DIN7380 (BHCS) screw with screws [M3x8 ultra low profile](https://it.aliexpress.com/item/1005004510603548.html?spm=a2g0o.cart.0.0.706e18fcFaEjIK&mp=1&gatewayAdapt=glo2ita)

Purchase list necessary for the correct assembly of the mod:
[1x] Sherpa Mini Extruder (BOM below), or: [trianglelab](https://it.aliexpress.com/item/1005002487727392.html?spm=a2g0o.cart.0.0.202b18fcH6ThBb&mp=1&gatewayAdapt=glo2ita) - [Mellow](https://it.aliexpress.com/item/1005003671542821.html?spm=a2g0o.cart.0.0.573618fcwBdMSj&mp=1&gatewayAdapt=glo2ita)
[2x] [Screws M3x12 DIN7380](https://it.aliexpress.com/item/1005003116299250.html?spm=a2g0o.cart.0.0.202b18fcS3NtEW&mp=1&gatewayAdapt=glo2ita)
[2x] [Nuts M3 DIN934](https://it.aliexpress.com/item/1005003116246413.html?spm=a2g0o.cart.0.0.202b18fcUWI6jI&mp=1&gatewayAdapt=glo2ita) [only for File1]
[2x] Ruthex M3S inserts [3DJake](https://www.3djake.it/ruthex/inserto-filettato-m3s-100-pezzi) -- [Amazon](https://www.amazon.it/filettato-filettate-pressione-ultrasuoni-stampante/dp/B09ZHSGHXD/ref=sr_1_1?qid=1692187281&s=merchant-items&sr=1-1&th=1) [only for File2]
[2x] [Generic inserts (M3 OD5 Length 4mm)](https://it.aliexpress.com/item/1005005699285828.html?spm=a2g0o.cart.0.0.166318fc5nZOwG&mp=1&gatewayAdapt=glo2ita) [only for File3]

Purchase list necessary for the correct assembly of the Sherpa Mini (only necessary if you print at home):
[1x] BMG gear set [3DJake](https://www.3djake.it/bondtech/bmg-internals-set-per-sherpa-mini) -- [TriangleLab](https://it.aliexpress.com/item/1005002192629947.html?spm=a2g0o.cart.0.0.2a9f18fcC6NiJO&mp=1&gatewayAdapt=glo2ita) -- [Mellow](https://it.aliexpress.com/item/1005002254954384.html?spm=a2g0o.cart.0.0.59fa18fcHHoZFW&mp=1&gatewayAdapt=glo2ita)
[1x] [Thickness M3x7x0.5](https://it.aliexpress.com/item/1005004510602735.html?spm=a2g0o.cart.0.0.7b2918fclu8F0N&mp=1&gatewayAdapt=glo2ita)

Tools needed:
Allen Wrench HEX 2 [included with Ghost 5 printer]
Allen Wrench HEX 2.5 [included with Ghost 5 printer]
Soldering iron [only for File2 or File3 and assembly Sherpa Mini]
Cutter

Contact me for any doubts and/or problems during installation
Constructive criticisms are welcome

Direct Drive Sherpa Mini per Flying Bear Ghost 5

File 1.3mf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6162681.
[Assembly](https://youtu.be/_6KxvrRBz5Q)

[Assembly with BLTouch](https://youtu.be/y4M8CZJiRlk)

MOD head for Flying Bear Ghost 5 with 2 blower fans 4010 for better cooling of the extruded material
possibility of mounting support for the installation of BLTouch

Fits original Flying Bear [Hotend](https://it.aliexpress.com/item/1005001405511170.html?spm=a2g0o.cart.0.0.202b18fcj2Kaqy&mp=1&gatewayAdapt=glo2ita) and [PCB](https://it.aliexpress.com/item/1005001671384356.html?spm=a2g0o.cart.0.0.431d18fcE2Lu89&mp=1&gatewayAdapt=glo2ita)
Fanducts optimized for correct and efficient cooling of the material
The project was designed to be printed without the use of supports (excluding fanducts)
________________________
Purchase list necessary for the correct assembly of the head:

[2x] blower fan 4010 (recommended [Gdstime](https://it.aliexpress.com/item/1005005094281105.html?spm=a2g0o.order_list.order_list_main.25.69993696WPHBZ0&gatewayAdapt=glo2ita) model: 24V Ball 12000RPM)

[1.3 Allen screwdriver](https://it.aliexpress.com/item/1005004756788364.html?spm=a2g0o.cart.0.0.344b18fcbdS187&mp=1&gatewayAdapt=glo2ita)

DIN 7380 screws
[4x] [M2x5](https://it.aliexpress.com/item/1005003116299250.html?spm=a2g0o.order_detail.order_detail_item.7.6a0a582feKZdQn&gatewayAdapt=glo2ita)
[4x] [M2x10](https://it.aliexpress.com/item/1005003116299250.html?spm=a2g0o.order_detail.order_detail_item.7.6a0a582feKZdQn&gatewayAdapt=glo2ita)
[2x] [M2.5x14](https://it.aliexpress.com/item/1005003116299250.html?spm=a2g0o.order_detail.order_detail_item.7.6a0a582feKZdQn&gatewayAdapt=glo2ita)

DIN 7991 screws
[1x] [M2x16](https://it.aliexpress.com/item/1005003116728453.html?spm=a2g0o.order_detail.order_detail_item.4.6a0a582feKZdQn&gatewayAdapt=glo2ita)
[2x] [M2x6](https://it.aliexpress.com/item/1005003116728453.html?spm=a2g0o.order_detail.order_detail_item.4.6a0a582feKZdQn&gatewayAdapt=glo2ita) (only for model without BLTouch)
[2x] [M2x8](https://it.aliexpress.com/item/1005003116728453.html?spm=a2g0o.order_detail.order_detail_item.4.6a0a582feKZdQn&gatewayAdapt=glo2ita) (only for model with BLTouch)
[2x] [M3x8](https://it.aliexpress.com/item/1005003116728453.html?spm=a2g0o.order_detail.order_detail_item.4.6a0a582feKZdQn&gatewayAdapt=glo2ita) (only for model with BLTouch)


[2x] [M3 nuts](https://it.aliexpress.com/item/1005004510637660.html?spm=a2g0o.cart.0.0.6fbd18fcJyw44P&mp=1&gatewayAdapt=glo2ita) (only for model with BLTouch)
________________________
Screws removed from the original head:

DIN 912
[2x] [M3x5](https://it.aliexpress.com/item/1005003116411038.html?spm=a2g0o.order_detail.order_detail_item.22.6a0a582feKZdQn&gatewayAdapt=glo2ita)
[2x] [M3x10](https://it.aliexpress.com/item/1005003116411038.html?spm=a2g0o.order_detail.order_detail_item.22.6a0a582feKZdQn&gatewayAdapt=glo2ita)

DIN7380
[2x] [M3x15](https://it.aliexpress.com/item/1005003116299250.html?spm=a2g0o.order_detail.order_detail_item.7.6a0a582feKZdQn&gatewayAdapt=glo2ita)

________________________
Tools needed:

[1.3 Allen screwdriver](https://it.aliexpress.com/item/1005004756788364.html?spm=a2g0o.cart.0.0.344b18fcbdS187&mp=1&gatewayAdapt=glo2ita)

Allen Wrench 2 [included with Ghost 5 printer]
Allen key 2.5 [included with Ghost 5 printer]
Spade wrench 5,5 [included with Ghost 5 printer] - (only for model with BLTouch)

**ATTENTION:**
the screws are installed on plastic, so **DO NOT OVER-TIGHTEN THE SCREWS**

contact me for any doubts and/or problems during installation
constructive criticisms are welcome

Head double fan Flying Bear Ghost 5 with BLTouch optional

Testa doppia ventola Flying Bear Ghost 5 con BLTouch opzionale

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6175743.


English:																							
[installation videos](https://youtu.be/_GiLda07iU0)
[Instructions for pause at height Cura Slicer ENG](https://youtu.be/7D90Xvi7PYE)
[Instructions for pause at height Prusa Slicer ENG](https://youtu.be/r-nIErCvu_M)

Direct Drive modification system for Flying Bear Ghost 5 with extruder 	[LDO orbiter V2.0](https://www.orbiterprojects.com/orbiter-v2-0/)
The Orbiter extruder is a powerful Direct Drive extruder with a compact design, designed by Róbert Lőrincz and manufactured by LDO with hardened gears from Bondtech
Orbiter weight: about 135g
Motor LDO-36STH20-1004AHG (retraction speed of 120 mm/s and an acceleration of up to 8000 mm/s²)

Three designs to adapt to every need:
File1 fastening with M3 nuts
File2 fastening with premium threaded inserts	[Ruthex] (https://www.ruthex.de/)
File3 fastening with generic threaded inserts (China)

**ATTENTION:**																							
if you choose to print the file with M3 nuts, it is strictly necessary to print at **layer height 0.2**, and insert a print **pause at layer 115**

________________________
Purchase list necessary for the correct assembly of the extruder:
[1x] Orbiter Extruder V2.0 [3DJake](https://www.3djake.it/ldo-motors/orbiter-extruder-v20) -- [AliExpress 1](https://it.aliexpress.com/item/1005004247214578.html?spm=a2g0o.cart.0.0.48ad18fcnJETyJ&mp=1&gatewayAdapt=glo2ita)	 -- [AliExpress 2](https://it.aliexpress.com/item/1005003667391015.html?spm=a2g0o.cart.0.0.48ad18fcnJETyJ&mp=1&gatewayAdapt=glo2ita) --[Amazon](https://www.amazon.it/BIQU-Estrusore-Orbiter-Double-Direct/dp/B09XR3HZQ8?ref_=ast_sto_dp)
[2x] Screws 	[M3x8 DIN7380] (https://it.aliexpress.com/item/1005003116299250.html?spm=a2g0o.cart.0.0.202b18fcS3NtEW&mp=1&gatewayAdapt=glo2ita)
[2x] Nuts 	[M3 DIN934](https://it.aliexpress.com/item/1005003116246413.html?spm=a2g0o.cart.0.0.202b18fcUWI6jI&mp=1&gatewayAdapt=glo2ita) [solo per File1]
[2x] Ruthex inserts	[3DJake](https://www.3djake.it/ruthex/inserto-filettato-m3s-100-pezzi) -- [Amazon](https://www.amazon.it/filettato-filettate-pressione-ultrasuoni-stampante/dp/B09ZHSGHXD/ref=sr_1_1?qid=1692187281&s=merchant-items&sr=1-1&th=1) [solo per File2]
[2x] Generic inserts 	[(M3 OD4.2   Lenght 4mm)](https://it.aliexpress.com/item/1005005699285828.html?spm=a2g0o.cart.0.0.166318fc5nZOwG&mp=1&gatewayAdapt=glo2ita) [solo per File3]

________________________
Tools needed:
Allen Wrench HEX 2 [included with Ghost 5 printer]
Allen Wrench HEX 2.5 [included with Ghost 5 printer]
Soldering iron [only for File2 or File3]
Cutter

Contact me for any doubts and/or problems during installation																							
Constructive criticisms are welcome


________________________


Italiano:
[Video di installazione] (https://youtu.be/_GiLda07iU0)
[Istruzioni per pausa ad altezza su Cura Slicer ITA] (https://youtu.be/rGnkmj_Imxw)
[Istruzioni per pausa ad altezza su Prusa Slicer ITA] (https://youtu.be/kH354l2QQVU)

Sistema per modifica Direct Drive su flying Bear Ghost 5 con estrusore [LDO orbiter V2.0](https://www.orbiterprojects.com/orbiter-v2-0/)
L'Orbiter extruder è un potente estrusore Direct Drive con un design compatto, progettato da Róbert Lőrincz e prodotto da LDO con ingranaggi temprati di Bondtech
Peso orbiter: 135g circa
Motore LDO-36STH20-1004AHG (velocità di retrazione di 120 mm/s e un'accelerazione fino a 8000 mm/s²)

Tre disegni per adattarsi ad ogni esigenza:
File1 fissaggio tramite dadi M3
File2 fissaggio tramite inserti filettati premium [Ruthex] (https://www.ruthex.de/)
File3 fissaggio tramite inserti felettati generici (Cina)

**ATTENZIONE:**																						
se si sceglie di stampare il file con dadi M3, è strettamente necessario stampare ad **altezza layer 0.2**, e inserire **pausa di stampa** al layer 115.

________________________
Lista acquisti necessari per il corretto assemblaggio dell'estrusore:
[1x] Estrusore Orbiter V2.0 [3DJake](https://www.3djake.it/ldo-motors/orbiter-extruder-v20) -- [AliExpress 1](https://it.aliexpress.com/item/1005004247214578.html?spm=a2g0o.cart.0.0.48ad18fcnJETyJ&mp=1&gatewayAdapt=glo2ita)	 -- [AliExpress 2](https://it.aliexpress.com/item/1005003667391015.html?spm=a2g0o.cart.0.0.48ad18fcnJETyJ&mp=1&gatewayAdapt=glo2ita) --[Amazon](https://www.amazon.it/BIQU-Estrusore-Orbiter-Double-Direct/dp/B09XR3HZQ8?ref_=ast_sto_dp)
[2x] Viti 	[M3x8 DIN7380] (https://it.aliexpress.com/item/1005003116299250.html?spm=a2g0o.cart.0.0.202b18fcS3NtEW&mp=1&gatewayAdapt=glo2ita)
[2x] Dadi 	[M3 DIN934](https://it.aliexpress.com/item/1005003116246413.html?spm=a2g0o.cart.0.0.202b18fcUWI6jI&mp=1&gatewayAdapt=glo2ita) [solo per File1]
[2x] Inserti ruthex	[3DJake](https://www.3djake.it/ruthex/inserto-filettato-m3s-100-pezzi) -- [Amazon](https://www.amazon.it/filettato-filettate-pressione-ultrasuoni-stampante/dp/B09ZHSGHXD/ref=sr_1_1?qid=1692187281&s=merchant-items&sr=1-1&th=1) [solo per File2]
[2x] Inserti generic 	[(M3 OD4.2   Lenght 4mm)](https://it.aliexpress.com/item/1005005699285828.html?spm=a2g0o.cart.0.0.166318fc5nZOwG&mp=1&gatewayAdapt=glo2ita) [solo per File3]

________________________
Strumenti necessari:
Chiave a brugola 2 [inclusa con stampante Ghost 5]
Chiave a brugola 2,5 [inclusa con stampante Ghost 5]
Saldatore stagno [solo per File2 o File3]
Taglierino Cutter

Contattatemi per qualsiasi dubbio e/o problema durante l'installazione
Critiche costruttive sono ben accette

Direct Drive Orbiter for Flying Bear Ghost 5 

Direct Drive Orbiter per Flying Bear Ghost 5 

Free my models 83b6a6a2bb
https://www.printables.com/it/@Nicotina52_1113858
https://www.thingiverse.com/nicotina52/designs
https://thangs.com/designer/Nicotina52
https://cults3d.com/en/users/Nicotina52/3d-models



Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Nicotina52

Achievements

Seedling