Boomalope from one of my favorite game, RimWorld.

Needs a little support on the front. 

Scale it as you wish.

Cheers!

Boomalope - RimWorld 

Muffalo from one of my favorite game, RimWorld. 

Needs a little support under the eyes only. Set the min support angle to 60°.

Scale it as you wish.

Cheers!

Muffalo - RimWorld 

Centipede from one of my favorite game, RimWorld. 
The body needs no support, the head does. I found the best was to print the head is in this orientation, see on the pic 3. If you find a better way go with it.

Be careful with scaling, the clearance between the head and body also scales.

Centipede - RimWorld 

Head V1,1.stl

Egg display or soft boiled egg holder. Stackable and fast to print a set as gift. 

0.2 layer height is fine.

To have the best result place the seam  coordinates to x = 0 and y = 0 relative to the model. That way the seam is mostly on the inside and not visible at all.

Fancy egg holder 

A crab sculpt to hold your toothbrush, glasses or fancy pen.
Not an easy print.

I printed with layer height of 0.12, used tree supports with the min angle of 60° to minimize supports. I also used raft to help with support removal and to help with the cooling while shielding heat from the build plate.



Keepitcrab 

Dropped some wax on the print and then shaved off the surface. Check the video.


Printed with 0.2 layer height, 4 top and 4 bottom layers. 

If you don't want wax then you can do a filament change before the last 4 layers. But will have a different effect.

Restroom sign, wax filled 

Dropped some wax on the print and then shaved off the surface. Check the video.

[https://youtube.com/shorts/lZUcXCAa1ZQ](url)

Printed with 0.2 layer height, 4 top and 4 bottom layers. 

If you don't want wax then you can do a filament change before the last 4 layers. But will have a different effect.

I used to be a circus artist and teacher but when COVID started I lost my job and became a stay at home dad. But to let out the steam of creativity I taught myself 3D modeling and started publishing my creations.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

<div class="markdown"><p>I used to be a circus artist and teacher but when COVID started I lost my job and became a stay at home dad. But to let out the steam of creativity I taught myself 3D modeling and started publishing my creations.</p></div>