A simple adapter plate for mounting standard turn signals with an 8mm mounting hole to your Kawasaki ER-6n pre-facelift (2006-2008). Might also work with the fully faired version ER-6f (EUR) / Ninja 650R (US) and the post-facelift models.

The model also has a 3mm hole for an additional bolt for mounting. This is not fully necessary for mounting, but can give you peace of mind when mounting your blinkers with this plate. You need to print two for each side, so 4 in total.

Best printed in some material which can withstand higher temperatures and the outdoor elements. Something like nylon is probably best, but PETG should work fine. I printed mine in PCTG, and they have held up great so far.

Kawasaki ER-6n Adapter Plate for Universal Rear Blinkers

Rear Blinker Adapter.stl

A lightweight shell for Steelseries sensei 310.

After buying a new mouse, my old one was left collecting dust. Heavily inspired by Optimun Tech's Zeromouse (https://www.youtube.com/@optimumtech, https://zeromouse.co/), I modelled this to make your Sensei 310 a lightweight aiming monster, coming in at sub 30 grams of total weight.

Minimal weight reduction has also been achieved by desoldering the scroll wheel

With the mouse being so light, the cable causes quite a lot of noticeable drag. Hence, a mouse bungee is much recommended for this setup.

Featuring:
- Shell optimized for fingertip grip: This kind of shell can be quite hard to use with palm or relaxed grip. The triggers are slanted by 4 degrees down towards the right side and 8 degrees down towards the front.
- Under 30 grams of total weight: The light weight makes it feel almost like you hold no - Reverse triggers: Again, heavily inspired by Optimum Tech, the reverse triggers provide quick clicks with very little no pre-travel, while maintaining ease of printing
- Slots for 6,5mm universal mouse skates: I've yet to get my hands on some. On a good mouse pad the mouse works quite well even without due to its light weight.
- USB-C connectivity: I soldered the original wire into a USB-C breakout board like this to make the mouse itself easily modifiable and detachable: https://www.amazon.de/-/en/RtottiM-Pieces-Female-Connector-Breakout-Blue-green/dp/B0BB68QYV9/ref=sr_1_3?crid=B7OMJLEF4I0X&keywords=usb+c+breakout&qid=1704491630&sprefix=usb+c+breakout%2Caps%2C138&sr=8-3
- No additional hardware needed to assemble: Use the motherboard mounting screws to mount the motherboard, and the outer shell screws (unscrewed under the original skates) to attach the triggers
- Included led diffuser file can be mounted in conjunction with one of the mainboard screws to even out the light shining from the singular led soldered to the PCB
- Steelseries engine still recognizes the mouse as an original sensei 310, even with the daughter boards removed, so adjustments to dpi, accelerations (if one wants to use those) and the singular LED left on the PCB can be made.

Sadly this mod removes the most well-known features of the sensei lineup: ambidextrous design and two side buttons on each side. This mouse has right-handed design, and no side buttons. Also, the scroll wheel has to be desoldered for the triggers to fit.

The trigger models have been marked with I for the left trigger and II for the right click, for ease when assembling.

Lightweight Mouse Shell Steelseries Sensei 310 

base.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

NPZ

Achievements

Trailblazer

Sequoia

Kawasaki ER-6n Adapter Plate for Universal Rear Blinkers

Lightweight Mouse Shell Steelseries Sensei 310