A Half Fix Point is escentially a Fix Point cut in half so it can fit in a smaller Fix Point Hole. It has the same function as a regular Fix Point, but it has 8 different rotation variations.

The rotation is indicated using arrows, the arrows should point upwards. Most of the time you will only need the Top and Bottom variations.

(If you are screwing this part into the small holes of the old Multiboard Tiles, you might need a different rotation of the Half Fix Point since the thread orientation of the Tiles has been updated. You'll probably need the Top Left or Bottom Right variations instead)

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts to create the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io