Mid Hole - Bolt Locker
Used for bolt-locking inserts to parts that have mid holes. For example, a Base Plate to an Insert Bracket, or a DS Snap to an Insert.
Learn more about this part at https://multiboard.io/knowledge-hub
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.
For more information about printer settings, click here.
This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io
Fix Point to Countersink Adapter
Flush - Small Hole Center Marking Tool
6.25 Offset - Small Hole Center Marking Tool
12.5 Offset - Small Hole Center Marking Tool
2x6 MU - Right Support End - Modular Bolt-Locked Shelf
4x8 MU - Center - Modular Bolt-Locked Shelf
2x2 MU - Right Support End - Modular Bolt-Locked Shelf
2x6 MU - Left Support End - Modular Bolt-Locked Shelf
8x8 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Right Support End - Modular Bolt-Locked Shelf
4x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Left Support End - Modular Bolt-Locked Shelf
2x2 MU - Left Support End - Modular Bolt-Locked Shelf
8x2 MU - Center - Modular Bolt-Locked Shelf
8x4 MU - Center - Modular Bolt-Locked Shelf
2x4 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Right Support End - Modular Bolt-Locked Shelf
8x6 MU - Center - Modular Bolt-Locked Shelf
2x8 MU - Center Support - Modular Bolt-Locked Shelf
I don't understand what this part is for. It claims to be used for insert brackets but they have a much larger thread and seem to need locking bolts instead? Is this a deprecated part?
Maybe for parts like Push-Fit Cleats, which have a small thread hole?
this is 100% the wrong part for what is displayed. If you are using the bolt locked bracket, place a snap in the shelf (just one) and then use the T-Bolt locker. you get a really nice snug fit and it holds a treat. https://thangs.com/designer/Multiboard/3d-model/Locking%20T-Bolt-1310062
Thanks for That.
Why do these all have the same double sided threaded part?
you are meant to print it like that and then bend it flat together so its one threaded part. I remixed it to avoid this
Well they're stronger if you don't. On the other hand I don't think it matters.