Demo: https://youtu.be/FZ0bEtsZiyY

Banana Slicer

License: For personal use only. Do not Re-upload.

Banana Slicer

Demo:

Banana Slicer

License: For personal use only. Do not Re-upload.

Demo https://youtu.be/HmZlDS2neB8

DIY Mini Tumbler

License: Only for Personal Use. Don't re upload anywhere else



Mini Tumbler

Tumbler Motor Shaft

Demo https://youtu.be/Q6jorX0elP4

Children and some old people cna't open Peanut, or use mouth to open it, which ruins the mouth taste. 
So I made this to make is much much easier and faster and joy to Enjoy Peanuts. 

License: For Personal Use. Do not upload Anywhere.

Peanut Cracker

Demo  https://youtu.be/dg4kOABotSg

Print this twice with support for overhang. 

License: Do not re-upload anywhere. Not for Commercial Use.

Tensgrity Table

Demo 

Print this twice with support for overhang. 

License: Do not re-upload anywhere. Not for Commercial Use.

Demo https://youtu.be/q78H7ItUgKQ

Folding 4 Blade Shuriken

License: For personal Use only. Can't be shared. 

Note: Make at your own Risk.

Folding Shuriken

Folding Shruriken Blade

This is Cool Little Print in Place (fully Assembled) Desktop Fountain. 

For Demo Check this. https://youtu.be/5PUPhEH79vE

Although this doesn't leak in short term, but waterproofing will help for Long Term.

A little submersible pump is Used  with 2 AA Batteries to Pump up the Water.
Link to Submersible: 
US Amazon: https://amzn.to/2OyLWRg
India: https://amzn.to/3qNiUdZ
Banggood: https://www.banggood.com/custlink/Kv3Y81OaDy

License: Only for Personal use. Don't Share this model anywhere. Only On Thangs by me AKA MrExpert.
ANy Question? Comment Below

Desktop Fountain - Fully Assembled

Demo https://youtu.be/HuOe2P_tAFA

Fun Multi Pen Holder.

Do not re upload this model. just for personal use.

Multi Pen Writer

Demo

Fun Multi Pen Holder.

Do not re upload this model. just for personal use.

Gyro Model

Main Ring

Plastic Karambit Demo https://youtu.be/GCseDJ4i20U

Note: Do not Post this model anywhere. its just for personal play purpose.

Karambit 

3D Printable PEN

3D Pen Body

Spring Pen Holder

Marble Maze Game

Marble Game Maze

Gear Clock (Wall & Desktop)

Gear Clock Body

Mini Persian Sword 

Multipurpose Holder 
Demo on https://youtu.be/tBx8qDBKTl8

Springy Holder

Print in Place Wavy Stand . This is Fully assembled, works right off the bed.

Print it in standing mode without support, but if you want extra strength you can print it in horizontal mode, but that will require support.

Check Video for quick Demo https://youtu.be/FaNAWxa1ggA

License: Released under CC BY-NC-SA 4.0 creativecommons.org/licenses/by-nc-sa/4.0

Printed at 0.2 mm Layer Height with 15-50% infill. 

Multipurpose Stand - Print in Place

Print in Place Wavy Stand . This is Fully assembled, works right off the bed.

Print it in standing mode without support, but if you want extra strength you can print it in horizontal mode, but that will require support.

Check Video for quick Demo https://youtu.be/j1CNX-FSGhY

License: Released under CC BY-NC-SA 4.0 creativecommons.org/licenses/by-nc-sa/4.0

Printed at 0.2 mm Layer Height with 20% infill. 

Wavy Multipurpose Stand 

Print in Place Ratcher PLIER . This is Fully assembled, works right off the bed.

Check Video for quick Demo https://youtu.be/j1CNX-FSGhY

License: Released under CC BY-NC-SA 4.0 creativecommons.org/licenses/by-nc-sa/4.0

Printed at 0.2 mm Layer Height with 20% infill. 

Ratchet Plier - Fully Assembled 

Print in Place Ratcher PLIER . This is Fully assembled, works Right of the bed.

Check Video for quick Demo https://youtu.be/j1CNX-FSGhY

Printed at 0.2 mm Layer Height with 20% infill. 

Ratchet Plier - Print in Place

Designed Holder

Video https://youtu.be/2Y3i9rhRrnY

Holder

Holder MrExpert.stl

24 to 6 Gear Reduction from Popular Million Gear Ratio Video https://youtu.be/1jRqMCd7dU4

24 to 6 Gear - from Million Gear Reduction

6to24 gear v1.stl

Print 3 Blade twice in contrasting color for Total Six blade Shuriken.
Shuriken or Ninja Stars were used in Samurai Arsenal. This is just a Toy to play.
Note: Although it is plastic but be careful. Make at your own risk.

Print the model at 0.2mm layer height with 15% infill. 
No Infill no Support Required 
Checkout this Video for Instructions https://youtu.be/6oCOz2TW_nU

6 Blade Shuriken  (Two 3 blades combined) 

3 blade shuriken .stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like