_**Find our full catalogs on Printables.com and MyMiniFactory**_

**St. Joseph's Cathedral of Sioux Falls, South Dakota** in the United States is a catholic temple built in the XX Century and recently restored. It is one of the greatest landmarks of the city, along with the Sioux Falls themselves.


MiniWorld3D is happy to bring this historical model to life as a homage to the people of Sioux Falls. This model was created from scratch by hand and brain in parametric software to ensure printability, using photographs and blueprints to create a beautiful and stylized version of your favorite landmarks.  Please give credit, it's all about spreading culture! 

Be sure to follow us:

instagram.com/miniworld3d
 

**MiniWorld3D** is a collective of 50+ artists creating the best library of 3D printable models of landmarks of the world!

Model by Dany Sánchez for MiniWorld3D.

**---------
Printing Tips**
Suggested parameters:

For better details, print slow, such as 15 or 20mm/s for outer perimeters.
Fine-tune retraction to avoid stringing.
Perimeters: 2
Top layers: 3
Infill: as low as 12%

No supports needed, this has been optimized to eliminate all overhangs.

**This model cannot be remixed, republished, or reposted. Proper credit must be given when referenced.
This work is licensed under a
Creative Commons (4.0 International License)
Attribution—Noncommercial—No Derivatives**

Sioux Falls Cathedral - USA

**St. Joseph's Cathedral of Sioux Falls, South Dakota** in the United States is a catholic temple built in the XX Century and recently restored. It is one of the greatest landmarks of the city, along with the Sioux Falls themselves.


MiniWorld3D is happy to bring this historical model to life as a homage to the people of Sioux Falls. This model was created from scratch by hand and brain in parametric software to ensure printability, using photographs and blueprints to create a beautiful and stylized version of your favorite landmarks.  Please give credit, it's all about spreading culture! 

Be sure to follow us:

instagram.com/miniworld3d
 

**MiniWorld3D** is a collective of 50+ artists creating the best library of 3D printable models of landmarks of the world!

Model by Dany Sánchez for MiniWorld3D.

**---------
Printing Tips**
Suggested parameters:

For better details, print slow, such as 15 or 20mm/s for outer perimeters.
Fine-tune retraction to avoid stringing.
Perimeters: 2
Top layers: 3
Infill: as low as 12%

No supports needed, this has been optimized to eliminate all overhangs.

_Home for many centuries to a dreadful dynasty of vicious vampires…_

Our most popular premium model, inspired by the myths of Transylvania, has now come to Thangs.

Print this **Vampire Castle** in regular or lamp version to decorate your home or Halloween party, Count Dracula style!

We keep pushing our own limits and worked hard for this model to have incredible details that will keep you staring at it.  Enjoy printing this premium model as much as we did modeling it! Lots of detail and effort went into this, we hope you have fun discovering every corner of the castle!

We are happy to bring these models to life and celebrate Halloween with you. **MiniWorld3D** is the collection of 3D printable landmarks and models of the real and fantasy world! All our models are made from scratch by hand and brain.

Find all our profiles, YouTube channel & social media on:

[linktr.ee/miniworld3d](https://linktr.ee/miniworld3d)

Follow us on IG!

[instagram.com/miniworld3d](https://instagram.com/miniworld3d)

We are also on Patreon!

[patreon.com/MiniWorld3D](https://www.patreon.com/MiniWorld3D)
 
**MiniWorld3D** is a collective of 55+ artists creating the best library of 3D printable models of landmarks of the world!

This model was created by MiniWorld3D founder Dany Sánchez. 

_Print photos by @plasticznetherlands, @3d_unclephil, WildRoseBuilds, TEN, WIckwire's Workshop, Mack Whillans, and more, thank you everyone!

This is a fan interpretation, no copyright infringements intended.
_
 

_Re-selling these files online, or selling physical prints on platforms like on Etsy without a Reseller License issued by MiniWorld3D is strictly forbidden, legal action will be taken. If you are interested in selling this, send us a message, we have attractive Reseller License plans where we all can win._

-----------------
**PRINT SETTINGS**

**No supports**, proven!

Print slow, such as 20mm/s outer perimeters.

Infill as low as 12%, lightning pattern and halving steps possible.

**Tips:**

**BASE**: This simulates a rock cliff where the castle stands. Print this at regular orientation, standing up. It has some "rings" on the top layer that are intentional, they will simulate vines as they hang from the cliffs. If you don't like them or don't print well, just clip them. Place an LED tealight on it, ideally without the plastic encasing. Scale up if needed to fit the light source of your preference.

**TOP (CASTLE):**  NOTE: Some slicers automatically try to orient the model to optimize contact area with the print bed. If this happens, your castle will not be correctly aligned and you will see that the first layer is halved or missing. Override this "smart" orient and do a default or manual 90 degrees. See images for reference. Print with little infill, between 5% - 10% , then drill or cut a hole in the bottom for the tea so the LED can fit. You can try printing without bottom layers. 



Vampire Castle

vampire-castle-lamp-top.stl

vampire-castle-lamp-base.stl

vampire-castle-miniworld3d.stl

_"I am the morning sun,
come to vanquish this horrible night!"_

🌙 🩸 Inspired by the classic video game franchise **Castlevania**, this is MiniWorld3D's take on the famous fortress of **Count Dracula Tepes**!

Our **Vampire Castle** from 2019 was a success, and in 2020 we pushed the boundaries once more, showing the interiors of the castle that generations of heroes of the **Belmont** family had to cross in order to reach Dracula and defeat him and his hordes of evil.

Print this in regular or lamp version to impress your friends this Halloween! Included in your download are both versions and a complete assembly for reference.

Enjoy printing this premium model as much as we did modeling it! Lots of detail and effort went into this, we hope you have fun discovering every corner of the Castle!

We are happy to bring these models to life and celebrate Halloween with you. **MiniWorld3D** is the collection of 3D printable landmarks and models of the real and fantasy world! All our models are made from scratch by hand and brain.

Find all our profiles, YouTube channel & social media on:

[linktr.ee/miniworld3d](https://linktr.ee/miniworld3d)

Follow us on IG!

[instagram.com/miniworld3d](https://www.instagram.com/miniworld3d/)

We are also on Patreon!

[patreon.com/MiniWorld3D](https://www.patreon.com/MiniWorld3D)
 

**MiniWorld3D** is a collective of 55+ artists creating the best library of 3D printable models of landmarks of the world!

This model was created by MiniWorld3D founder Dany Sánchez. 

Thanks to @theprintsregent , @slimprintnl @3d_unclephil , @de3dprintman , @plasticznetherlands and @hugo_hth for the print photos!
Assembly video by @CrazyFilament

 

_Re-selling these files online, or selling physical prints on platforms like on Etsy without a Reseller License issued by MiniWorld3D is strictly forbidden, legal action will be taken. If you are interested in selling this, send us a message, we have attractive Reseller License plans where we all can win._

**-----------------
PRINT SETTINGS

No supports**, REALLY, proven. 

Print slow, such as 20mm/s outer perimeters.

Infill as low as 12%, lightning possible.

BASE: Print upside-down (rotate 180 deg), with the larger flat area on the print bed.
For the lamp verison, place an LED tealight in the hole of the pedestal, ideally without the plastic encasing.

TOP (CASTLE): Print at normal orientation, standing up. 



Dracula's Castle - Castlevania

1-main-castlevania-by-miniworld3d-lamp-version.stl

2-base-rock-print-upside-down-lamp-version.stl

3-pedestal-lamp-version.stl

base-rock-print-upside-down.stl

castlevania-miniworld3d.stl

dracula-castlevania-by-miniworld3d-for-reference-only.stl

pedestal.stl

throne-bottom-upsidedown.stl

throne-insert.stl

3D printable famous architecture.
Full catalogs in Printables & Cults3D. More than 55 authors have contributed to create 250+ models.

Founded & led by Mexican designer Dany Sánchez.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

<div class="markdown"><p>3D printable famous architecture.
Full catalogs in Printables &amp; Cults3D. More than 55 authors have contributed to create 250+ models.</p>
<p>Founded &amp; led by Mexican designer Dany Sánchez.</p></div>

MiniWorld3D

Pinned models

Vampire Castle

Dracula's Castle - Castlevania

Sioux Falls Cathedral - USA