 Intel Pro 1000 4 Port Full Height Bracket 

 Short Story Time. Had this card with a low profile bracket....didn't want to buy a full length bracket. 

The PCI-E Bracket is for the Intel Pro/1000 4 Port Ethernet card

This bracket is strong enough to plug and pull. Printing with PLA is fine, if you print in another material let me know please, would love to hear the results. 

Instructions to print 

    You must generate supports! If you are using Cura I recommend setting your print settings to advanced. 

    Support structure must be Tree
    Touching build plate
    the rest of the settings are up to you for supports (default worked for me)
    infill was set to 20% but that is only a recommendation*

    Let me and everyone know if any settings have better results.
    the hole is for a M3 insert. It is not entirely necessary to be screwed in but recommended 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

MechThumbs

Achievements

Seedling

Intel Pro 1000 4 Port Full Height Bracket