I really liked this design of the original, it was just a little to delicate, and I beefed up the connection a bit.  

Remixed From:
https://makerworld.com/en/models/488575

Tweezer Holder Multiboard

Tweezer Holder Multiboard v2.stl

Small tool holder for your 3d printer tools.
I added a spot for Micro SD Cards and nossels.  
Includes Full Size Snap for Multiboard.
*Created for my Anycubic Kobra 2 Neo

Printing: 15% fill, I printed right side up with no supports.

Remix From These Models:
https://www.printables.com/model/773872
https://www.thingiverse.com/thing:6479525

3D Printer Tool Holder Multiboard

3D Printer Tool Holder Multiboard.stl

Pencil holder for multiboard

Print Rightside up, no supports, 15%

Remixed From:
https://www.printables.com/model/476636-pencil-box-holder-for-honeycomb-storage-wall/files

Multiboard Honeycomb PENCIL Holder 75mm x .stl

Multiboard Honeycomb PENCIL_HLDR 75mm Short.stl

Winsor & Newton Oil Paint Holder - Multiboard 

This will require the standard Multiboard Snaps

Remix of:
https://www.printables.com/model/773880/files

Winsor and Newton Oil Paint Holder - Multiboard.stl

Gabline Oil Paint Holder - Multiboard 

This will require the standard Multiboard Snaps

Remix of:
https://www.printables.com/model/773880/files

Gamblin Oil Paint Holder - Multiboard.stl

Caliper mount with spots for 4 LR44 button batteries
Multiboard Snap

Printing:
I print this on it's back with some supports, pictured.  15% fill.

Remix of:
https://www.printables.com/model/780028/files

Caliper Mount with LR44 Holder Multiboard.stl

Caliper Mount with LR44 Holder.stl

Multiboard Honeycomb PENCIL Holder.stl

Multiboard Honeycomb PENCIL_HLDR.stl

This holds 4 of the 23ml larger Tamiya paint bottles, with a 40.5mm diameter, for mounting on Multiboard.

Print Direction:
Print in the normal orientation, no supports, 15% fill.

This will need the Multiboard Snaps

Remixed From:
https://makerworld.com/en/models/428105#profileId-332152


Tamiya 23ml Bottle 40.5mm Paint Holder 4x MULTIBOARD.stl

Tamiya 23ml Bottle Holder Multiboard v2.stl

This holds 4 of the 10ml Tamiya paint bottle, with a 36mm diameter, for mounting on Multiboard.

Print Direction:
Print in the normal orientation, no supports, 15% fill.

6x Holder found here:
https://thangs.com/designer/MavTrav/3d-model/Tamiya%2036mm%2010ml%20Paint%20Holder%206x%20MULTIBOARD.stl-1079218

This will need the Multiboard Snaps

Remixed From:
https://www.printables.com/model/600030-tamiya-35mm-paint-holder-for-honeycomb-wall


Tamiya 10ml Bottle 36mm Paint Holder 4x MULTIBOARD.stl

Tamiya 36mm Paint Holder with Stars 4x.stl

This holds 6 of the 10ml Tamiya paint bottle, with a 36mm diameter, for mounting on Multiboard.

Print Direction:
Print in the normal orientation, no supports, 15% fill.

4x Holder found here:
https://thangs.com/designer/MavTrav/3d-model/Tamiya%2010ml%20Bottle%2036mm%20Paint%20Holder%204x%20MULTIBOARD.stl-1079220

This will need the Multiboard Snaps

Remixed From:
https://www.printables.com/model/600030-tamiya-35mm-paint-holder-for-honeycomb-wall


Tamiya 36mm 10ml Paint Holder 6x MULTIBOARD.stl

Tamiya 36mm Paint Holder with Stars.stl

This holds the 40ml square Timya Bottles.

Print Details:
Print upright, no supports, 15% Fill

Remixed from this file:
https://www.printables.com/model/541605-hsw-tamiya-extra-thin-glue-holder



Tamiya Glue Holder Multiboard.stl

Tamiya Glue Holder (Cut Out) Multiboard v2.stl

This holds 2 Loctite Super Glue Gel Style bottles.

This is for the Multiboard and uses the standard FULL snap.

I printed with 3 walls and supports, there is a tiny ledge in the back snap.  I assume it can be printed without support.

Model I started with:
https://www.printables.com/model/312575



Loctite Super Glue Holder - Multiboard

loctite Gel v2.stl

Let's say you put up your part b snaps, without considiring orientation, and simply rotating the original Triple Snap Connector will not work.  This one is a reverse of the OG to help you out.

**Printing Guidelines:
The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

Triple Snap Connector Reverse - DS Part B - Standard (0.5) v2.stl

I created this part to allow a command strip to be attached to the back.  It is sized for a Large command strip.  I know this piece may come in the future officially, and I will remove this when it does.  I needed something ASAP to get my board up and hope this can help someone else.

It is flat on the back, and one large command strip will hold it well.  I cut up 2 to get rid of the little wobble having one on the back will create.
This is 1mm shorter than the original to give room for the command strip, it evens out with the standard 8 mm Offset Snaps.

**Printing Guidelines:**
The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing support. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. 

Use the standard [Cross Quad Snap Connector - DS Part B](https://thangs.com/designer/Keep%20Making/3d-model/Cross%20Quad%20Snap%20Connector%20-%20DS%20Part%20B-974127)


8 mm, Cross Quad Offset Snap - DS Part A - Command Strip.stl

Quad Command.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

MavTrav

Achievements

Trailblazer

Seedling

Fan Favorite