Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4609580.

Extruder redesign to convert cr10s pro to direct

we need....
https://es.aliexpress.com/item/32976742501.html?spm=a2g0s.9042311.0.0.30b863c06OaVPl

https://es.aliexpress.com/item/32950480311.html?spm=a2g0s.9042311.0.0.274263c0lHFNGe

https://es.aliexpress.com/item/32951656343.html?spm=a2g0s.9042311.0.0.274263c0lHFNGe

https://es.aliexpress.com/item/32765763550.html?spm=a2g0s.9042311.0.0.274263c0lHFNGe

https://es.aliexpress.com/item/4000543978012.html?spm=a2g0s.9042311.0.0.274263c0lHFNGe

the original hotend is maintained, posivility and use the same sensor or install bltouch, layer fan is used  https://www.thingiverse.com/thing:3586824 by Waynera


CR10s Pro Direct Drive

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4296799.

Codificación para volcano,

Ender 3 CR10 Direct Drive / VOLCANO

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4629471.

Este es un rediseño para  Bondtech BMG / E3D v6 / E3D VOLCANO.

Debido a la falta de algún soporte de extrusor directo  para ender5 y ender5 plus he rediseñado este modelo en colaboración con @themaker3dp, consta de dos partes, la base hay dos diseños uno para E3DV6 y otro para E3D VOLCANO, la tapa es común para las dos. Espero que lo disfrutéis.

29/10/2020  Diseño v6 modificado por error de diseño subida versión_beta pendiente de confirmación.

12/11/2020 Confirmación OK Diseño v6
 
Soporte de bltouch thing:4165032 por Avenportis 

https://www.youtube.com/watch?v=I1WOt2wHzlA



This is a redesign for Bondtech BMG / E3D v6 / E3D VOLCANO.

Due to the lack of some direct extruder support for ender5 and ender5 plus I have redesigned this model in collaboration with @ themaker3dp, it consists of two parts, the base there are two designs one for E3DV6 and one for E3D VOLCANO, the cover is common for the two. I hope you enjoy it

29/10/2020  Design v6 modified due to design error uploaded beta_version pending confirmation.

12/11/2020 Confirmation OK Design v6




Ender 5PLUS Direct Drive V6 / VOLCANO

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4663418.

Este es un rediseño para Bondtech BMG / E3D v6 / E3D VOLCANO.

Consta de dos partes, la base hay dos diseños uno para E3DV6 y otro para E3D VOLCANO, la tapa es común para las dos. Espero que lo disfrutéis.


Soporte de bltouch thing:4165032 por Avenportis

This is a redesign for Bondtech BMG / E3D v6 / E3D VOLCANO.

It consists of two parts, the base there are two designs one for E3DV6 and one for E3D VOLCANO, the cover is common for both. I hope you enjoy it.


Bltouch thing support: 4165032 by Avenportis

CR10S_PRO DIRECT V6 _ VOLCANO

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4715117.

Soporte E3D V6 para ender montaje bowden




E3D V6 bracket for ender bowden mount


 E3Dv6 Bowden ENDER3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3966502.

Este diseño desde el primer momento me gusto mucho, debido a que queda todo muy compacto, el único problema desde mi punto de vista en la forma de fijar todo el extrusor, me parecía muy poco fiable.
Por ello se agrega una solapa para mejorar el soporte.

I liked this design from the first moment, because everything is very compact, the only problem from my point of view in the way of fixing the entire extruder, it seemed very unreliable.
Therefore, a flap is added to improve support.

Ender 3 CR10 Direct Drive / Extruder with BMG and E3D v6

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2909655.

Doble Extrusor Independiente


ARES_3D DUAL EXTRUDER

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1580003.

Doble Extrusor Independiente
 Basado en:
http://www.thingiverse.com/thing:115885
http://www.thingiverse.com/thing:245977
http://www.thingiverse.com/thing:1037870
http://www.thingiverse.com/thing:1325347
http://www.thingiverse.com/thing:45243
http://www.thingiverse.com/thing:1052288
http://www.thingiverse.com/thing:761806

Extrusor Dual 20*20

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4816219.

https://www.thingiverse.com/thing:4636725, Me gusto mucho este diseño para prruebas de filamentos, de esta manera podemos colocarlos, etiquetarlos con la marca y material.


https://www.thingiverse.com/thing:4636725, I really liked this design for testing filaments, this way we can place them, label them with the brand and material.




FILAMENO Holder/Display Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4296727.

Aquí está el enlace para el rollo
https://www.thingiverse.com/thing:4226002

2020 NUNCA TE OLVIDARE - Un soporte para un rollo

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3626038.

La Basílica Menor y Real Santuario1​ de la Virgen del Camino se encuentra en la localidad de La Virgen del Camino, perteneciente al municipio de Valverde de la Virgen, en la provincia de León (España). Está dedicada a la Virgen del Camino, patrona de la región de León y de la ciudad de Pamplona, y se encuentra en la ruta del Camino de Santiago, de donde recibe su nombre. La actual basílica fue construida entre 1957 y 1961 por el arquitecto fray Coello de Portugal en sustitución de un santuario anterior que había quedado pequeño para acoger a todos los feligreses y peregrinos. Su construcción fue sufragada en parte gracias al mecenas Pablo Díez, dueño del Grupo Modelo, una multinacional de cerveza de México. Está regida por la Orden de los dominicos, quienes promovieron una iglesia de estilo moderno, tanto en su arquitectura como en su decoración escultórica.2​

PLA:
Blanco: https://www.leon-3d.es/producto/pla-ingeo-blanco-1-75mm/
Plata: https://www.leon-3d.es/producto/pla-ingeo-3d850-plata-1-75mm/
Negro: https://www.leon-3d.es/producto/pla-ingeo-3d850-negro-1-75mm/
Marron: https://www.leon-3d.es/producto/pla-ingeo-3d850-marron-1-75mm/

Basílica de la Virgen del Camino

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1944931.

0.2 layer


Letrero Puerta

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3409756.

Cambio color Z_2mm

Change color Z_2mm


WC USE THE FORCE Toilet Sign

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2513989.

Box for ramps 1.4 and arduino.
- 4 screws m3 * 8
- 4 screws m3 * 10
- 4 screws m3 * 16
- Fan 50 * 50 * 10

Ramps 1.4 BOX /COVER 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2434026.

Manten tus tarjetas ordenadas.
Diseño para mendel max xl.
 https://www.thingiverse.com/thing:711973
http://www.makergal.es/

Sd_Card Mendel XL

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2801124.

Dual extruder calibration test print

Calibration Cube (DUAL EXTRUDER)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2046520.

Tape gun Spare parts

Tape gun

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4663339.

Defecto Hotend para impresora Legio.

Evita que el  ventilador del hotend envíe el aire directamente sobre el bloque calefactor, con ello se consigue una temperatura mas estable.

Defector Hotend LEGIO

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2361617.

El colmo de los colmos una llave para que no se cierre la puerta. :) :)

DOOR_STOP_KEY

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3363340.

.

Señalización de extintor

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2626075.

KEY CHAIN SEAT
dual extruder

Key chain SEAT

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3759595.

Housing for FYSETC 12864 mini lcd display.

Additional parts:
4 screws M3x12

FYSETC 12864 mini LCD housing

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3726312.

Motor / Arm protectors for the Martian IV Quadcopter frame.

Martian IV Quadcopter Motor Protector

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Maus

Achievements

Seedling

Explorer