tracking pixel
MatMire_Makes

River Otter - Articulated Figure

by
MatMire_Makes
Follow
Follow
Remix Model
MatMire_Makes
MatMire_Makes
|
Image 1 of 18
River Otter - Articulated Figure 3d model
MatMire_Makes
MatMire_Makes
|
Image 1 of 18
River Otter - Articulated Figure 3d model
2D
3D
Makes
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure 3d model
River Otter - Articulated Figure - Look at this cute little FACE! I love it so MUCH. <3 - 3d model
River Otter - Articulated Figure 3d model
This model is restricted by licensing terms. 

Introducing my new River Otter design!

It's super-flexible and fully print-in-place, and features a pop-in mechanism in the neck segment that allows it to hold it's head up when in a standing pose. Here's a quick demo video of how it works!

Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)!!

I hope you like it!

Please, share photos of your makes! I would love to see them!

PLEASE READ: All MatMire Makes Designs are protected under Copyright Law. Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of MatMire Makes designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

Printing Details

  • River Otter: 100% Print-in-Place. No supports needed. There is a small custom brim around the head to help with adhesion. Remove and discard it after printing
  • Multicolor 3MF (Compatible with PrusaSlicer and Bambu Studio)
  • 10%-15% Infill (I recommend Gyroid, Crosshatch or 3D Honeycomb)
  • 3 Walls. (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)

This should generally scale down to about 60% with full articulation, on a well calibrated printer. Your mileage may vary.

Features a pop-in mechanism in the neck segment that allows it to hold it's head up when in a standing pose. Here's a quick demo video of how it works!

*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.


10 Likes4 DownloadsOctober 12, 2024


10 Likes4 DownloadsOctober 12, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density10 %
SupportsNone
BrimNo
MulticolorAutomatic material system (AMS)
Infill styleGyroid