tracking pixel
MatMire_Makes

Rat - Articulated Figure

by
MatMire_Makes
Follow
Follow
Remix Model
MatMire_Makes
MatMire_Makes
|
Image 1 of 16
Rat - Articulated Figure 3d model
MatMire_Makes
MatMire_Makes
|
Image 1 of 16
Rat - Articulated Figure 3d model
2D
3D
Makes
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
Rat - Articulated Figure 3d model
This model is restricted by licensing terms. 

Introducing the Rat! This articulated rodent prints in 3 parts and snap-fits together.  The head has a small pre-support that will have to be removed before it can be snapped into the body.  No slicer supports needed!

Here is a video demo of the model!

*Includes a multicolor 3MF that works in both Bambu Studio and PrusaSlicer

Please, share photos of your makes! I would love to see them!

PLEASE READ: All MatMire Makes Designs are protected under Copyright Law. Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

Printing Details

  • Head: Snap-Fit to Body. Pre-Supported for easy printing. No additional support needed.
  • Body: Print-In-Place. Snap-Fit to Head. No supports needed.
  • Tail: Print-In-Place. Snap-Fit to body. No supports needed.
  • Multicolor 3MF: includes a multicolor 3MF that works in both Bambu Studio and PrusaSlicer
  • 5%-15% Infill.
  • 3 Walls. Here's a quick Video of the head and tail assembly.

9 Likes1 DownloadsOctober 12, 2024


9 Likes1 DownloadsOctober 12, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density10 %
SupportsNone
BrimNo
MulticolorAutomatic material system (AMS)
Infill styleGyroid