tracking pixel
MatMire_Makes

Platypus - Articulated Figure

by
MatMire_Makes
Follow
Follow
Remix Model
MatMire_Makes
MatMire_Makes
|
Image 1 of 17
Platypus - Articulated Figure 3d model
MatMire_Makes
MatMire_Makes
|
Image 1 of 17
Platypus - Articulated Figure 3d model
2D
3D
Makes
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
Platypus - Articulated Figure 3d model
This model is restricted by licensing terms. 

Introducing my new Platypus design! A true oddity of the natural world. The more you learn about these funny fellas, the weirder they get. My kind of critter.

It's fully print-in-place, and features a few mechanisms to allow the head to either move freely or pop into a slot that holds it in an upward looking pose. Here's a quick demo video of how it works!

Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)!!

I hope you like it!

Please, share photos of your makes! I would love to see them!

PLEASE READ: All MatMire Makes Designs are protected under Copyright Law. Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of MatMire Makes designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

Printing Details

  • Platypus: Print-In-Place, No additional support needed.
  • 3MF: includes multicolor 3MF file (compatible with both PrusaSlicer and Bambu Studio)
  • 5%-15% Infill.
  • 3 Walls.

Head locking mechanism allows you to pose it looking up. Here's a quick demo video of how it works!

This should generally scale down to about 65% with full articulation, on a well calibrated printer. Your mileage may vary.


7 Likes1 DownloadsOctober 12, 2024


7 Likes1 DownloadsOctober 12, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density10 %
SupportsNone
BrimNo
MulticolorAutomatic material system (AMS)
Infill styleGyroid