Print 40% 4 top/bottom/perimeters  Needs longer 1/4-20 bolt/machine screw (3/4 to 1-1/4" long)  to fasten into the main box

Tripodbase and Pin.stl

Print 40% 4 top/bottom/perimeters  Needs longer 1/4-20 bolt/machine screw (3/4 to 1-1/4" long)  to fasten into the main frame

Print at 40%  4 top/bottom/perimeters  This is a protective cover that uses a Miller auto lens, & a go pro camera to allow an individual to record what they are welding.  It mounts to a tripod. You will have to heat a  1/4-20 bolt & thread into the bottom of the frame, let cool, then remove. Suggest using a longer bolt than what is normally on tripod adapters.

MainBoxV2.stl

Print at 20% infill 4 top/bottom/perimeters

WholeCover.stl

Print 100% infill  4 top/bottom/perimeters

GoProMount.stl

**Y'all know what to do...LOL**
File and Prints of models not to sell or resale
This is a remix of the PoochRock and the Articulated Lobster by dadavinblanc
https://www.thingiverse.com/thing:4153708

PoochRockLobster.stl

**Y'all know what to do...LOL**

This is a remix of the PoochRock and the Articulated Lobster by dadavinblanc
https://www.thingiverse.com/thing:4153708

**By Joel Telling request...**  File and Prints of models not to sell or resale

Crate.stl

Just for fun. File and Prints of models not to sell or resale

PoochRockC2.stl

Haven't seen a file for this, so I created one for fun based off a picture.  It may not be perfectly correct and that's ok.  I recommend printing at a 0.15 layer height with 10 - 15 % infill and a 3-4mm brim.  This is designed best as possible to print without any supports.  File and Prints of models not to sell or resale

StarWarsPowerConverter.stl

Haven't seen a file for this, so I created one for fun based off a picture.  It may not be perfectly correct and that's ok.  I recommend printing at a 0.15 layer height with 10 - 15 % infill and a 3-4mm brim.  This is designed best as possible to print without any supports.

#3DPNSpeakerCover Design Challenge.  Multi part model to be printed, some parts painted, and assembled.  **There is an orientation of the Silver trim pieces to the Inner basket.**  Base in Black. Inner basket and top ring in Med Blue. Top ring gets Silver accent paint to match Silver filament. Trim pieces and hand in Silver.  Lettering in Dk Grey or BlueGrey.  Parts are glued together using MainDesign image to help with assembly. Covers are then secured to speakers using double sided automotive tape so no screw holes are shown..

#3DPNSpeakerCover BuildersMark

Use this image to help in assembly of model. Top ring must align with inner basket. Silver trim pieces must be assembled to certain spots. Keep orientation of parts aligned for assembly.

MainDesign.stl

Mil Veteran & jack of all trades, master of some, who likes to see every opportunity as a learning experience & loves to create

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Marcusdecarcus1

Achievements

Seedling

Explorer